Home
About Us
- TIRO TOOL
- ZUERN
- ISCAR
- Turn-Groove
- Parting
- DGFHR/L Parting and Grooving Reinforced Blades for DO-GRIP Inserts
- DGFHR/L-B-D..(R/L) : Double- and single-ended, parting and grooving reinforced blades for double-en
- DGFHL-26B-TR-D : Double- and single-ended, parting and grooving reinforced blades for double-ended
- DGFH Parting and Grooving Blades with and without Coolant Holes for DO-GRIP Inserts
- DGFS Blades for Multi-Spindle Machines, Replacement for HSS and Brazed Tools
- HGFH Parting and Grooving Blades for 3 mm GRIP Inserts
- KIT DGFH Kit Contains Parting and Grooving Blades with Coolant Holes for DO-GRIP Inserts
- DGAD/HGAD Adapters for Parting and Grooving, for DO-GRIP Double-Ended Inserts
- DGAD-B-D Parting and Grooving Adapters for Double-Ended Inserts, for Davenport HMSDV Machines
- HGPAD Adapters for GRIP and HGPL 3...Y Groove-Turn Inserts
- DGTR/L Integral Shank Parting and Grooving Toolholders
- DGTR/L-B/BC-D Integral Shank, Reinforced, Parting and Grooving Toolholders
- DGTR/L-B-D-SH Parting and Grooving, Short Head Toolholder, for CNC and Swiss Automatics
- DGTR/L-B-D-TR Reinforced Parting and Grooving Toolholders for Double-Ended DO-GRIP Inserts
- DGTR/L-B-T-SH Reinforced Parting and Grooving Toolholders for the DGN Double-Ended Inserts
- DGTR/L-BC-T Parting and Grooving Toolholders with Coolant Holes for JET-CUT Inserts with Coolant H
- TGFH/R/L Blades with Tangentially Oriented Pocket for Parting and Grooving, for TANG-GRIP Single-En
- TGFS Blades for Multi-Spindle Machines - Replacement for HSS and Brazed Tools, Using TANG-GRIP Inse
- TGFH-MB Parting and Grooving Blades for Other Manufacturer's Blocks, Carry TANG-GRIP Single-Ended I
- KIT TGFH Kit Contains Parting and Grooving Blades, for TANG-GRIP Single-Ended Inserts with a Stoppe
- TGSU Flat Top Blades with Tangentially Oriented Pocket for Parting and Grooving, for TANG-GRIP Sing
- TGFH-S Single-Sided Blades for TANG-GRIP Parting and Grooving Inserts
- TGFHR/L Double and Single Ended, Parting and Grooving, Reinforced Blades for TANG-GRIP Tangentially
- TGFHL-TR TANG-GRIP Reinforced Blades for Traub and Index Machines, for TANG-GRIP Tangentially Clamp
- TGTR/L Integral Shank, TANG-GRIP Parting and Grooving Toolholder
- TGBHR/L Integral Shank, Toolholders for Heavy Duty Groove-Turn and Parting Applications
- TGTR/L-2T..SH-L120 Integral Shank, Short-Head, TANG-GRIP Parting and Grooving Toolholder
- TGAD Parting and Grooving Adapters for TANG-GRIP Tangentially Clamped Inserts
- SGB Single-Sided Blades for SELF-GRIP Parting & Grooving Inserts
- SGFH (Four-pockets) Parting and Grooving Four-Pocket Blades
- SGFH/R/L SELF-GRIP Blades with and without Coolant Holes for Parting and Grooving with Single-Ended
- SGFS Replacement SELF-GRIP Blades for HSS and Brazed Parting Tools
- SGIH/R/L Blades for Parting and Grooving with SELF-GRIP Inserts (without a stopper)
- SGFHR/L-26T/32T SELF-GRIP F-Type, Double- and Single-Ended, Reinforced Holder Blades
- SGAFR/L SELF-GRIP Integral Shank Tool for Swiss Automatic Machines
- SGAHR/L SELF-GRIP Integral Shank Tools for Swiss Automatic Lathe Machines
- SGTFR/L SELF-GRIP, Integral Shank Tool for Parting & Grooving
- SGTFR/L-D SELF-GRIP, Reinforced Tool for Parting & Grooving
- SGTHR/L SELF-GRIP, Reinforced Integral Shank Tool for Parting and Grooving
- SGFR/L-B-D-SH Integral Shank, Short Head, Parting and Grooving Toolholder, for CNC and Swiss Automa
- CGHN-D Double-Ended Blades for External Grooving and Turning
- CGHN-S External Machining Single-Ended Blades
- CGHN-DG Double-Ended Blades for External Grooving and Turning Self Clamped Inserts
- GHDR/L (Short pocket) External Holders for Turning, Grooving and Parting
- GHGR/L External Holders for Deep Machining
- GHSR/L External Machining Holders for Swiss Automatic Machines
- HELIR/L External Holder for Turning, Grooving and Parting
- PHGR/L Holders for External Deep Grooving and Turning
- PHSR/L External Machining Holders for Swiss Automatic Machines
- GHDR/L (Long pocket) External Holders for Turning, Grooving and Parting
- SCHR/L-B/F Grooving and Turning Holders, for Swiss-Type Automatics - Back Clamping (Front Clamping
- GEHSR/L Grooving and Turning Holders, for Swiss-Type Automatics
- GHDR/L-8A External Toolholders for Turning, Grooving and Parting, with a Hard Layer Coated Upper Ja
- GAD External Machining Adapters for CUT-GRIP Inserts
- PADR/L Adapters for GDMW/GDMY Groove-Turn Inserts
- GADM Adapters for External CUT-GRIP Grooving and Turning Inserts, Mounted on GHAR/L Holders
- CGPAD Adapters for Groove-Turn Inserts
- PCHBR/L Double-Ended Parting and Grooving Blades for PENTACUT Inserts
- PCHR/L-24 Grooving Parting and Recessing Holders for Inserts with 5 Edges
- PCHPR/L Facing, Grooving, Parting and Recessing Perpendicular Holders for Inserts with 5 Cutting Ed
- PCHR/L-34 Grooving Parting and Recessing Holders for Inserts with 5 Edges
- PCADR/L Adapters for PENTACUT Groove-Turn Inserts
- C#-GHDR/L : External grooving turning and parting toolholders, with CAMFIX (ISO 26623-1 standard)
- C#-HELIR/L External Holders for Turning, Grooving and Parting with CAMFIX (ISO 26623-1 standard) Ex
- UBHCR/L Holders for Grooving Turning and Parting Blades
- Drilling
- PICCO-MF Multifunction, Solid Carbide Tools for Drilling, Facing, Int. and Ext. Turning on Swiss an
- PICCO-MFT Solid Carbide Tools for Drilling, Facing, Int. and Ext. Turning and Threading on Swiss an
- A-SXFOR-DR Boring and Drilling Bars for XOMT Inserts
- DR-MF-2.25D Multifunction Drilling, Boring, Facing and External Turning Tool
- DIN 69871
- ADJ DIN69871-ER Center Alignment DIN 6499 ER Collet Chucks with DIN 69871 Form ADB Taper Shanks
- DIN69871-ER (Form AD or B) DIN 6499 ER Collet Chucks with a DIN 69871 Form ADB Taper Shanks
- DIN69871-ER-SHORT Short Front End ER Collet Chucks with a DIN 69871 form ADB Tapered Shanks
- DIN69871-ER-BIN DIN 6499 Balanceable ER Collet Chucks with a DIN 69871 Tapered Shanks
- DIN69871-HYDRO Hydraulic Chucks with DIN69781 Form ADB Shanks
- DIN69871-MAXIN Power Chucks with DIN 69871 Form ADB Taper Shanks
- DIN69871-HYDRO (Heavy Duty) Short Hydraulic Chucks with DIN69781 Form ADB Shanks
- DIN69871-EM (DIN 6359 Short) Short Side Clamp Endmill Holders (DIN 6359-HB) with DIN 69871 Form AD
- DIN69871-EM (DIN 6359-HB) DIN 69871 Form ADB Taper Shanks Holders with DIN 6359-HB, for DIN 1835 Fo
- DIN69871-EM (DIN 6359-HE) DIN 69871 Form ADB Taper Shank Drill Holders with DIN 6359-HE for DIN 183
- DIN69871-SRK Thermal Shrinking Chucks with DIN 69871 Form ADB Taper Shanks, for Carbide Tools Only
- DIN69871-SRKIN Thermal Shrinking Chucks with DIN 69871 Form ADB Taper Shanks
- DIN69871-SEM-C ISO 3937 Shell Mill Holders with Coolant Holes and a DIN 69871 Form ADB Tapered Shan
- DIN69871-SEM ISO 3937 Shell Mill Holders with DIN 69871 Form AD Taper Shanks
- DIN69871-FM DIN 6357 Face Mill Holders with DIN 69871 Form AAD Taper Shanks
- DIN69871-SEMC DIN 6358 COMBI Shell Mill Holders with DIN 69871 Form AD Taper Shanks
- DIN69871-DC-B (Form A) DIN 238 Drill Chuck Arbors with DIN 69871 Form A Taper Shanks
- DIN69871-AD DIN 2080, DIN 69871A and BT MAS-403 Adapters with DIN 69871 Form A Taper Shanks
- DIN69871-EM (Coolant Nozzle) DIN 69871 Form ADB Taper Shanks Short Holders with DIN 6359-HB and Adj
- DIN69871-MT DIN 6383 Morse Taper Adapters with DIN 228-2 Form D Tang and DIN 69871 Form A Taper Sha
- DIN69871-MT-DRW DIN 6364 Morse Taper Adapters with DIN 228-2 Form B Draw Bar and DIN 69871 Form A T
- FITBORE DIN69871-EM Adjustable Drilling Diameter Holders with DIN69871 Tapered Shanks
- DIN69871-MAXIN-BIN Balanceable Power Chucks with DIN 69871 Form ADB Taper Shanks
- GTI DIN69871-ER (Tapping) DIN 6499 ER Tapping Attachments with DIN 69871 Form A Tapered Shanks
- DIN69871-CF DIN69871 Form AD Tapered Shanks to CLICKFIT Adapters
- DIN69871-ER-CLICKIN DIN69871 Form AD Tapered Shanks to CLICKIN Quick Change Connection Adapters
- DIN69871-ODP FLEXFIT Threaded Connection Shanks with Integral DIN69871 Form ADB Taper Adaptation
- ADJ DIN69871 FINEFIT Center Alignment Shank and Base with a DIN 69871 Form AD Taper Shank (For spec
- Threading - Threading (Ext.)
- GEHSR/L External machining holders, for Swiss-type automatics
- SCHR/L-B/F : Grooving and turning holders, for Swiss type automatics - back and front clamping
- GHSR/L : Grooving and turning holders, for Swiss-type automatics.
- GHDR/L (Short Pocket) : External holder for turning, grooving & parting.
- GHMR/L : CUT-GRIP toolholders for shallow radial and axial grooving. Light turning, small depth of
- GHMPR/L : CUT-GRIP, perpendicular toolholders for shallow radial and axial grooving. Light turning,
- GHGR/L : External holders for deep grooving and parting
- CGHN-D : Double-ended blades for external grooving and turning.
- CGHN-DG : CUT-GRIP double-ended blades for external grooving and turning self-clamped inserts.
- CGHN-S : Single-ended blades, used for grooving and turning.
- Threading - External threading
- SER/L : External threading toolholders (AD - short tools for adapter holders).
- SER-D : External threading, drophead toolholders.
- HSK A-SER/L : External threading holders with HSK exchangeable, tapered shanks.
- HSK A63WH-SEL : External threading tools with HSK exchangeable shanks for 15° mounting on turn-mill
- HSK A63WH-SE-KX : External threading tools, with HSK adaptation, 15° mounted on turn-mill machines.
- C#-SER/L : External threading toolholders with CAMFIX (ISO 26623-1 standard) exchangeable, tapered
- Threading - Threading (Int.)
- PICCO R/L-ISO-Thread : Mini-carbide bars for ISO, internal thread turning. Dmin 2.4 mm.
- PICCO-Whitworth-Thread : Mini-carbide bars for Whitworth profile internal threading. Dmin 4 mm.
- MGUHR : MINICHAM solid carbide bars used for internal turning and threading at 4 mm minimum bore di
- MGCH : CHAMGROOVE solid carbide bars for internal grooving, turning and threading Dmin 8 mm.
- GEHIMR/L : Internal machining boring bars with coolant holes, using GEMI and GEPI inserts in smalle
- GEHIMR/L-SC : Internal machining carbide bars with a coolant holes. Using GEMI and GEPI inserts in
- GEHIR/L : Internal machining bars with coolant holes using GEMI and GEPI inserts in widths larger t
- GEHIR/L-SC : Internal machining carbide bars with a coolant holes using GEMI and GEPI inserts in wi
- E-GEHIR / E-GHIR : Interchangeable heads for internal grooving and turning. Used on a solid carbide
- GHIR/L (W=1.9-6.4) : Internal grooving and turning bars.
- GHIR/L-C (W=4-6.4) : CUT-GRIP bars with internal coolant holes, used for grooving and turning.
- GHIR/L-SC (W=2-4.8) : CUT-GRIP solid carbide bars with internal coolant holes, used for grooving an
- CGIN 26 : Internal, single-ended blades, for grooving and turning.
- CGHN 32-DGM : Internal single-ended grooving and turning blades, using self clamped inserts.
- CGHN 26-M : Internal grooving and turning blades, for Dmin 70 mm, Tmax 18.7 mm.
- CGHN 32-M : Internal grooving and turning blades.
- Threading - Internal threading
- Threading - External thread milling
- MTEC E-ISO : Solid carbide external threading endmills used for ISO thread profile.
- MTEC E-UN : Solid carbide threading endmills with UN form, for external threading.
- MTECB-W : Solid carbide internal or external threading endmills with coolant holes, used for BSP th
- MTECZ-BSF/BSP : Solid carbide threading endmills with coolant holes located in the flutes, used for
- MTECZ-Whitworth : Solid carbide threading endmills with coolant holes located in the flutes, used f
- MTEC-W : Solid carbide threading endmills, used for internal or external BSP thread profile.
- MTECB-BSPT : Solid carbide external or internal threading endmills with coolant holes, used for BSP
- MTECZ-BSPT : Solid carbide threading endmills with coolant holes located in the flutes, used for in
- MTEC-BSPT : Solid carbide threading endmills, used for external or internal BSPT thread profile.
- MTECZ-NPT : Solid carbide threading endmills with coolant holes located in the flutes, used for in
- MTECB-NPT : Solid carbide threading endmills with coolant holes, used for external or internal NPT
- MTEC-NPT : Solid carbide threading endmills, for external or internal NPT thread profile.
- MTECZ-NPTF : Solid carbide threading endmills with coolant holes located in the flutes, used for in
- MTECB-NPTF : Solid carbide threading endmills with coolant holes, for external or internal NPTF thr
- MTEC-NPTF : Solid carbide threading endmills, for external or internal NPTF thread profile.
- MTSRH (endmills) : End mills for with coolant holes for helical threading inserts
- MTSR : Indexable threading endmills with Weldon shank and coolant holes.
- MTSRH (helical shell mill) : Shell mills for with coolant holes for helical threading inserts.
- MTSLE : External multi-tooth threading shell mills.
- MTSR-MULTI (shell mill) : Thread milling, multi-insert shell mills
- MTSR-C : Indexable threading endmills with long cylindrical carbide shanks and coolant holes.
- MTSR-Double Insert : Double insert threading endmills with Weldon shanks.
- MTSR-C-SINGLE : Indexable threading endmills with cylindrical carbide shanks, and coolant holes for
- MM TRD-W : MULTI-MASTER interchangeable solid carbide milling heads, for 55° partial profile threa
- MM TRD-M : MULTI-MASTER interchangeable solid carbide milling heads, for 60° partial profile threa
- Threading - Internal thread milling
- MTECI-A60 : 60° partial profile solid carbide thread mills with coolant holes directed to the cutti
- MTECSH-ISO : Small diameter short left-hand (CNC code M04) solid carbide ISO profile threading endm
- MTECS-MJ : Small diameter short solid carbide J-type profile threading endmills with coolant holes
- MTECS-ISO : Small diameter solid carbide ISO profile threading mills. High cutting speeds, short cy
- MTECQ ISO : Solid carbide endmills with internal coolant holes and a reduced diameter neck. Used fo
- MTECQ UN : Solid carbide endmills with internal coolant holes and a reduced diameter neck. Used for
- MTEC-ISO : Solid carbide internal threading endmills used for ISO thread profile.
- MTECB-ISO : Solid carbide internal threading endmill with coolant holes, used for ISO thread profil
- MTECZ-ISO : Solid carbide internal threading endmills with coolant holes located in the flutes.
- MTECB-W : Solid carbide internal or external threading endmills with coolant holes, used for BSP th
- MTECZ-BSF/BSP : Solid carbide threading endmills with coolant holes located in the flutes, used for
- MTECZ-Whitworth : Solid carbide threading endmills with coolant holes located in the flutes, used f
- MTEC-W : Solid carbide threading endmills, used for internal or external BSP thread profile.
- MTECSH-UN : Small diameter short left-hand (CNC code M04) solid carbide UN profile threading endmil
- MTECS-UNJ : Small diameter short solid carbide UNJ-type profile threading endmills with coolant hol
- MTECS-UN : Small diameter solid carbide UN profile threading mills. High cutting speeds, short cycl
- MTEC-UN : Solid carbide threading endmills used for internal UN thread profile.
- MTECZ-UN : Solid carbide threading endmills with coolant holes located in the flutes, used for inte
- MTECB-UN : Solid carbide threading endmills with coolant holes, used for internal UN thread profile
- MTECB-BSPT : Solid carbide external or internal threading endmills with coolant holes, used for BSP
- MTECZ-BSPT : Solid carbide threading endmills with coolant holes located in the flutes, used for in
- MTEC-BSPT : Solid carbide threading endmills, used for external or internal BSPT thread profile.
- MTEC-BSPT : Solid carbide threading endmills, used for external or internal BSPT thread profile.
- MTECZ-NPT : Solid carbide threading endmills with coolant holes located in the flutes, used for int
- MTECZ-NPT : Solid carbide threading endmills with coolant holes located in the flutes, used for int
- MTECB-NPT : Solid carbide threading endmills with coolant holes, used for external or internal NPT
- MTEC-NPT : Solid carbide threading endmills, for external or internal NPT thread profile.
- MTECZ-NPTF : Solid carbide threading endmills with coolant holes located in the flutes, used for in
- MTECB-NPTF : Solid carbide threading endmills with coolant holes, for external or internal NPTF thr
- MTSR : Indexable threading endmills with Weldon shank and coolant holes.
- MTSR-C : Indexable threading endmills with long cylindrical carbide shanks and coolant holes.
- MTSR-C-SINGLE : Indexable threading endmills with cylindrical carbide shanks, and coolant holes for
- MTSR-Double Insert : Double insert threading endmills with Weldon shanks.
- MTSRH (endmills) : End mills for with coolant holes for helical threading inserts
- MTSRH (helical shell mill) : Shell mills for with coolant holes for helical threading inserts.
- MTSR-MULTI (shell mill) : Thread milling, multi-insert shell mills
- MM TRD-W : MULTI-MASTER interchangeable solid carbide milling heads, for 55° partial profile thread
- MM TRD-M : MULTI-MASTER interchangeable solid carbide milling heads, for 60° partial profile thread
- MT-ISO-MM : Carbide milling heads with a threaded (MULTI-MASTER) connection for internal ISO metric
- MT-UN-MM : Carbide milling heads with a threaded (MULTI-MASTER) connection, for internal UN thread
- Threading - Taps for deep blind hole
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP3 (H.S.S.) : HSS R.H. 40° spiral flute, machine taps for ISO metric coarse threads, according to
- TP5 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP6 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP10 (H.S.S.) : HSS right-hand 45° spiral flute, machine taps for ISO metric coarse threads, accord
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Threading - Taps for short blind hole
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP1 (H.S.S.) : HSS gun point, DIN 371 machine taps for ISO metric coarse threads, according to DIN
- TP3 (H.S.S.) : HSS R.H. 40° spiral flute, machine taps for ISO metric coarse threads, according to
- TP4 (H.S.S.) : HSS R.H. 20° spiral flute, machine taps for ISO metric coarse threads, according to
- TP5 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP6 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP10 (H.S.S.) : HSS right-hand 45° spiral flute, machine taps for ISO metric coarse threads, accord
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Threading - Deep hole with short thread
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP3 (H.S.S.) : HSS R.H. 40° spiral flute, machine taps for ISO metric coarse threads, according to
- TP4 (H.S.S.) : HSS R.H. 20° spiral flute, machine taps for ISO metric coarse threads, according to
- TP5 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP6 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP10 (H.S.S.) : HSS right-hand 45° spiral flute, machine taps for ISO metric coarse threads, accord
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Threading - Taps for deep through hole
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP2 (H.S.S.) : HSS gun point, DIN 376 machine taps for ISO metric coarse threads, according to DIN
- TP7 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13.
- TP8 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13, for
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Threading - Taps for short through hole
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP2 (H.S.S.) : HSS gun point, DIN 376 machine taps for ISO metric coarse threads, according to DIN
- TP7 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13.
- TP8 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13, for
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Threading - Threading kits & sets
- Threading - Drill Face Ext Int Turn Thread
- Milling - Bottom deburring
- Milling - Facing
- FDN-CM : Full width slotting cutters flanged type, with round and octagonal inserts
- SOE45 8/16 : 45° endmills using square or octagonal double-sided inserts with 8/16 cutting edges (H
- SOF45CL : 45° face mills, using square or octagonal double-sided inserts with 8/16 cutting edges (H
- SOF45 : 45° face mills, using square or octagonal double-sided inserts with 8/16 cutting edges (HEL
- S845 F45SX-16 : 45° face mills, featuring very rigid clamping, carrying inserts with 8 helical, rig
- HOF : HELIOCTO, Face mills using octagonal, round and high feed segmented radius inserts.
- F45NM : 16MILL, screw lock, 45° face mills, using Octagonal ONHU/MU 0806... inserts with 16 cutting
- F45KT : HELIOCTO, 45° face mills, using octagonal or round inserts.
- F45ST : 45° screw clamped face mills with SEK/MT 12... inserts.
- F45LN-N15 : TANGMILL, 45° face mills with LN..1506... tangentially clamped inserts.
- F45WG : 16MILL, wedge lock, 45° face mills, using Octagonal ONHU/MU 0806... inserts with 16 cutting
- FCM : CHAMMILL, multi-functional face mills for four different insert contours.
- FCM : CHAMMILL, multi-functional face mills for four different insert contours.
- H490 F90AX-09 : 90° face mills using the H490 ANKX 09.. double-sided rectangular inserts with 4 hel
- 3M F45AX-20 : MILL2000, Heavy duty 45° face mills using 3M AXKT 2006... inserts with dovetail secti
- FF FWX-08 : Fast feed face mills carrying double-sided Inserts with 6 cutting edges (HELIDO UPFEED
- MF FWX-08 : HELIDO UPFEED H600 LINE - moderate feed face mills carrying double-sided inserts with 6
- FTP-LN10 : HELITANG, high feed shell mill, carrying tangentially clamped inserts with 4 cutting edg
- H400 FR-10 : Face mills carrying double-sided inserts with four 5 mm radius cutting edges (HELIDO R
- H400 FR-12 : Face mills carrying double-sided inserts with four 6 mm radius cutting edges (HELIDO R
- H400 FR-16 : Face mills carrying double-sided inserts with four 8 mm radius cutting edges (HELIDO R
- F45WX-08 : 43° face mills with 6 cutting edged double-sided inserts.
- F45WX-05 : HELIDO UPFEED face mills for fast feed, carrying double-sided Inserts with 6 cutting edg
- FF FW : FEEDMILL, fast feed face mills using FF WOMT... inserts. Can run at very high feed rates of
- S865 FSN-13 : HELIDO, Face mills carrying inserts with 8 cutting edges. A very efficient solution f
- T465 FLN-22 : HELITANG T465 Line, 65° face mills using tangentially clamped inserts with 4, 22 mm l
- F45E : 45° face mills with SEKN/R 12... inserts.
- F75AP : HELIMILL, 75° face mills with AP..-1003... inserts.
- F75A : HELIMILL, 75° face mills with AD..-1505... inserts.
- F75 : 75° face mills with SPKN/SPKR/SPUN 1203.. inserts.
- 3M F75AX-13 : MILL2000, Heavy duty 75° face mills with 3M AXKT 1304... inserts with dovetail sectio
- 3M F75AX-20 : MILL2000, Heavy duty 75° face mills with 3M AXKT 2006... inserts with dovetail sectio
- H490 F90AX-12 : 90° face mills using H490 ANKX 12.. double-sided, rectangular inserts with 4 helica
- H490 F90AX-17 : 90° face mills using H490 ANKX 17.. double-sided rectangular inserts with 4 helical
- T290 FLN-10 : SUMOMILL, 90° face mills with tangentially clamped, T290 LNMT 1004... inserts with 2
- T490 FLN-08 : 90° face mills with tangentially clamped inserts.
- T490 FLN-13 : HELITANG T490 Line, 90° face mills using T490 LNMT/LNHT 13... tangentially clamped in
- T290 FLN-15 : SUMOMILL, 90° face mills with tangentially clamped, T290 LNMT 1506... inserts with 2
- T490 FLN-16 : HELITANG T490 Line, 90° face mills using T490 LNMT 16... tangentially clamped inserts
- F90LN-N11 : TANGMILL, 90° face mills with LN..1106... tangentially clamped inserts.
- F90LN-AFR CA11 : Adjustable 90° face mills (used mainly for PCD/CBN inserts)
- F90LN-N15 : TANGMILL, 90° face mills with LN..1506... tangentially clamped inserts.
- HM90 F90AP-10 : HELI2000, 90° face mills with HM90 APKT 1003... inserts.
- HM90 F90A-15 : HELI2000, 90° face mills with HM90 ADKT 1505... inserts.
- F90AD-SFR : Adjustable face mills (used mainly for PCD/CBN inserts). The adjustable tools provide e
- F90SP-10 : HELIQUAD, 90° face mills with S/X/QPMT 1004... inserts.
- F90SD-12 : HELIQUAD, 90° face mills with S/QDM. 12... inserts.
- F90SD-16 : HELIQUAD, 90° face mills using SDMT 1606... inserts.
- HP F90AN-07 : HELIPLUS, 90° fine pitch face mills with HP ANKT 0702.. inserts.
- HP F90AT-19 : HELIPLUS, 90° face mills with HP AD.. 1906... long edged inserts.
- HP F90AT-22 : HELIPLUS, 90° face mills with HP AD.. 2207... long edged inserts.
- 3M F90AX-13 : MILL2000, Heavy duty 90° face mills with 3M AXKT 1304.. inserts with dovetail section
- 3M F90AX-20 : MILL2000, Heavy duty 90° face mills using 3M AXKT 206.. inserts with dovetail section
- F90 : 90° face mills with TPKN/R inserts.
- HM90 FAL-16 : Face mills used for machining aluminum, with HM90 APCR 1605... HELIALU inserts.
- HM90 FAL-16BR : Face mills for machining aluminum, carrying inserts with corner radii equal or larg
- HM90 FAL-22 : Face mills used for machining aluminum, with HM90 APCR 2206... inserts (HELIALU).
- HM90 FAL-15 : Face mills with HM90 AXCR 1505.. HELIALU inserts for machining aluminum.
- SPM-D-CA : Face mills with adjustable cartridges for high speed machining of aluminum alloys, cast
- Milling - Shouldering
- T290 ELN-05 : Endmills with Tangentially Clamped Inserts.
- ECH-B-6 : 6 flute, 45° helix, medium length, solid carbide endmills. Used for finishing of hard mat
- TS T290 ELN : SUMOMILL endmill heads with tangentially clamped inserts and SHANK-MASTER threaded ad
- T290 ELN-MM-05 : Endmills with tangentially clamped inserts and MULTI-MASTER adaptation.
- E90CN : Toroidal, endmills carrying CNHT...inserts (TORMILL). Used mainly for milling square should
- E90CN-M : Endmills with FLEXFIT threaded adaptation carrying toroidal inserts (TORMILL). Used mainl
- T290 ELN-M-05 : Endmills with tangentially clamped inserts and FLEXFIT adaptation.
- T490 ELN-08 : HELITANG T490 Line, 90° face mills using T490 LNMT/LNHT 08... tangentially clamped in
- T490 ELN-MM..-08 : HELITANG, 90° endmills with a MULTI-MASTER threaded adaptation using T490 LNMT/L
- H490 E90AX-MM : 90° endmills with MULTI-MASTER threaded connection, using H490 ANKX/ANCX 09 double-
- T490 ELN-M-08 : HELITANG, 90° endmills with a FLEXFIT threaded adaptation using T490 LNMT/LNHT 08..
- T290 ELN-10 : SUMOMILL Endmills with tangentially clamped inserts.
- H490 E90AX-09 : 90° endmills using H490 ANKX 09... double-sided rectangular inserts with 4 helical
- H490 E90AX-12 : 90° endmills using the H490 ANKX 12...double-sided rectangular inserts with 4 helic
- H490 E90AX-M : 90° endmills with FLEXFIT threaded connection, using H490 ANKX/ANCX 09... double-sid
- H490 SM-17 : Extended flute shell mills carrying H490 ANKX 17.. double-sided rectangular inserts wi
- T490 ELN-13 : 90° endmills using T490 LNMT/LNHT 13... tangentially clamped inserts with 4 helical,
- T490 ELN-13-C# : 90° endmills with CAMFIX shanks using T490 LNMT/LNHT 13... tangentially clamped in
- T490 ELN-CF-13 : Endmills with a CLICKFIT adaptation and Tangentially Clamped Inserts
- HM90 E90A-10 : HELI2000 endmills for HM90 AP.. 1003... inserts.
- HM90 E90A-CF-10 : HELI2000 endmills with a CLICKFIT adaptation for HM90 AP.. 1003... inserts.
- HM90 E90A-MM-10 : HELI2000 90° endmills with a MULTI-MASTER threaded adaptation for HM90 AP.. 1003.
- HM90 E90A-M-10 : HELI2000 90° endmills with a FLEXFIT threaded adaptation for HM90 AP.. 1003... ins
- HM90 E90AD-15 : HELI2000, 90° endmills for HM90 ADKT-1505... inserts.
- HM90 E90AD-CF-15 : HELI2000, 90° endmills with a CLICKFIT adaptation for HM90 ADKT-1505... inserts.
- HM90 E90AD-M-15 : HELI2000, 90° endmills with a FLEXFIT threaded adaptation for HM90 ADKT-1505... i
- E90AD-HSK63-S : Adjustable Endmills (used mainly for PCD/CBN inserts). The adjustable tools provide
- H490 F90AX-09 : 90° face mills using the H490 ANKX 09.. double-sided rectangular inserts with 4 hel
- H490 E90AX-17 : HELIDO 90° endmills using the H490 ANKX 17...double-sided rectangular inserts with
- H490 E90AX-17-C# : 90° endmills with CAMFIX shanks that use H490 ANKX 17... double-sided rectangula
- H490 ANKD-C# : Extended flute endmills with CAMFIX shanks using the H490 ANKX 17...double-sided rec
- T490 ELN-16 : 90° endmills using T490 LNMT 16... tangentially clamped inserts with 4 helical, 16 mm
- HP E90AN-07 : Endmills using HELIPLUS HP ANKT 0702.. inserts. Extra fine pitch endmills with very t
- HP E90AN-MM-07 : 90° endmills with a MULTI-MASTER threaded adaptation using HELIPLUS HP ANKT 0702..
- TS HP E90AN : HELIPLUS 90° milling heads with SHANK-MASTER threaded adaptation, using HP ANKT 0702.
- HP E90AN-M-07 : 90° endmills with a FLEXFIT threaded adaptation using HELIPLUS HP ANKT 0702.. inser
- E90X : Endmills with square Q/S/XOMT inserts.
- E90SP : HELIQUAD endmills with S/XPMT inserts.
- 3M E90AX : MILL2000, 90° endmills heavy duty pocket design: dovetail section, inserts with helical
- 3M E90AX-CF : MILL2000, 90° endmills with a CLICKFIT adaptation, heavy duty pocket design: dovetail
- HCE : BALLPLUS, multifunction endmills which can carry ball nose, 90° and toroidal inserts.
- HCE-MM : BALLPLUS, multifunction endmills with a MULTI-MASTER threaded ddaptation which can carry b
- HCE-M : BALLPLUS, multifunction endmills with a FLEXFIT threaded ddaptation which can carry ball no
- ECM : CHAMMILL endmills for four insert shapes. Part of the CHAMELEON multi-functional line.
- ECM-CF : CHAMMILL endmills for four insert shapes with a CLICKFIT adaptation.
- HP E90AT-19 : HELIPLUS, 90° endmills carrying the HP AD.. 1906.. inserts with 18 mm long, helical c
- HP E90AT-CF-19 : HELIPLUS, 90° endmills with a CLICKFIT adaptation carrying the HP AD.. 1906.. inse
- HP E90AT-22 : HELIPLUS, 90° endmills carrying the HP AD.. 2207.. inserts with 22 mm long, helical c
- HP E90AT-CF-22 : HELIPLUS, 90° endmills with a CLICKFIT adaptation carrying the HP AD.. 2207.. inse
- HM90 EAL-15 : Long reach endmills used for machining aluminum, with HM90 AXCR 1505... inserts (HELI
- HM90 EAL-16 : Long reach endmills for machining aluminum, with HM90 APCR 1605 HELIALU inserts.
- HM90 EAL-CF4-16 : Long reach endmills with CLICKFIT Adaptation for machining aluminum, carrying HM9
- HM90 EAL-16BR : Long reach endmills, used for machining aluminum, carrying HM90 APCR 1605... insert
- HM90 EAL-HSK63A-15 : Long reach endmills with integral HSK adaptation, used for machining aluminum,
- HM90 EAL-HSK63A-16 : Long reach endmills with integral HSK adaptation, used for machining aluminum,
- ECA-H3-CF : CHATTERFREE, 3 flute solid carbide endmills with 39-41° different helix, 3, 4 and 5xD n
- EC-H4M-CFR : 4 flute endmills with different helix (35° & 37°) and variable pitch for chatter d
- EC-E4L-CF : 4 flute, 38° helix with variable pitch for roughing and finishing operations. High mate
- EC-H4L-CFR (Relieved neck) : 4 flute endmills with different helix (35° & 37°) and variable pit
- EC-H4XL-CFR (Relieved neck) : 4 flute long endmills with different helix (35° & 37°) and variab
- EC-E5L-CF : 5 flute, 38° helix with variable pitch for roughing and finishing operations. High mate
- EFS-B44 : FINISHRED, combination of roughing and finishing solid carbide endmill in a single tool.
- EFS-E44 : Combination of roughing and finishing solid carbide endmill in a single tool. 4 variable
- ECP-E3L : 3 flute, 38° helix medium length solid carbide roughing endmills with chip splitting cutt
- ECP-E4L : 4 flute, 38° helix medium length solid carbide roughing endmills with chip splitting cutt
- ECR-B-S : 4-7 Flute, 45° Helix, Short Length (1xD) Solid Carbide Roughing Endmills 4-7 flute, 45° h
- ECR-B-M/ECR-B-M...R : 4-7 flute, 45° helix medium length (2xd) solid carbide roughing endmills. Use
- ECR-B-L : 4-7 flute 45° helix, long reach (3xd) solid carbide roughing endmills. Used for high stoc
- EC-A-4 : 4 flute, 30° helix medium length solid carbide endmills.
- ECR-B-X : 4-5 flute, 45° helix extra long reach (4xd) solid carbide roughing endmills. Used for hig
- ECR-B-MF : Solid carbide roughing endmills with 4 and 6 flute, 45° helix, medium length (2xD). Used
- ECR-T-M : 4 flute, 20° helix medium length Solid carbide roughing endmills. Used for high stock rem
- ERF-A/E-3,4,6 : 3, 4, 6 flute, 30° and 38° helix, fine pitch, medium length solid carbide roughing
- ECR-B3-R : 3 flute, 45° helix solid carbide roughing endmills. Used for high stock removal rates on
- ERC-E-3 : 3 flute, 38° helix, medium length, solid carbide roughing endmills. Used for maximum stoc
- ECS/ECCS-E-3 : 3 flute, 38° helix short solid carbide slot / drill endmills with chamfered corners.
- EC-A-2 : 2 flute, 30 and 45° helix medium length solid carbide slot / drill endmills.
- EFF-S4 : High productivity solid carbide endmills. Can operate at feed rates up to 0.5 mm/tooth, at
- ECC-A-2 : 2 flute, 30° helix medium length solid carbide slot / drill endmills with chamfered corne
- ECC-A-4 : 4 flute, 30° helix medium length solid carbide endmills with chamfered corners.
- EC-E-3 : 3 flute, 38° helix medium length solid carbide endmills.
- ECC-E-3 : 3 flute, 38° helix medium length slot / drill solid carbide endmills with chamfered corne
- ECU-E-3 : 3 flute, 38° helix short undersized slot / drill solid carbide endmills
- ECU-E-3-R : 3 flute, 38° helix short undersized slot / drill solid carbide endmills with various ra
- EC-B-3 : 3 flute, 45° helix medium length slot / drill solid carbide endmills.
- EC-B3 (Economical-Medium) : SOLIDECO - economical type 3 flute, 45° helix center cutting medium len
- EC-B3 (Economical-Short) : SOLIDECO - economical type 3 flute, 45° helix center cutting short solid
- EC-B-3...R : 3 flute, 45° helix medium length slot / drill solid carbide endmills with various radi
- EC-B-4 : 4 flute, 45° helix medium length solid carbide endmills.
- EC-B-4...R : 4 flute, 45° helix medium length solid carbide endmills with various radii.
- EC-A-4...R : 4 flute, 30° helix medium length solid carbide endmills with various radii.
- EC-A2 (Rib Processing) : 2 flute, 30° helix solid carbide endmills. Used for rib processing on hard
- EC-A2 (Medium Length) : 2 flute, 30° helix medium length, solid carbide endmills for hard materials
- EC-A2(Economical-Extra Long) : SOLIDECO - economical type 2 flute, 30° helix center cutting extra l
- EC-A2 (Economical-Medium) : SOLIDECO - economical type 2 flute, 30° helix center cutting medium len
- EC-A2 (Economical-Short) : SOLIDECO - economical type 2 flute, 30° helix center cutting short solid
- EC-A3/E3 (Economical-Short) : SOLIDECO - economical type 3 flute, 30° and 38° helix center cutting
- EC-A3/E3 (Economical-Medium) : SOLIDECO - economical type 3 flute, 30° and 38° helix, center cuttin
- EC-A4 : 4 flute, 30° helix medium length solid carbide endmills. Used for hard materials up to 65 H
- EC-A4(Economical-Extra Long) : SOLIDECO - economical type, 3 flute 45° helix center cutting extra l
- EC-A4 (Economical-Medium) : SOLIDECO - economical type 3 flute, 45° helix center cutting medium len
- EC-B4-R : 4 flute, 45° helix extra-long solid carbide endmills with various corner radii. Used on h
- ECA-B-3 : 3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
- EFP-E4,5CF : 4, 5 flute 38° helix, sold carbide roughing endmills with chip splitting cutting edges
- ECA-B-2 : 2 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
- EC-D6 : 6 flute, 50° helix medium length solid carbide endmills. Used for finishing of hard materia
- EC-B6 : 6 flute, 45° helix extra long solid carbide endmills. Used for finishing of hard materials
- ECL-B-4/6 : 4 & 6 flute, 45° helix long solid carbide endmills.
- ECXL-B-4/6 : 4 & 6 flute, 45° helix extra long solid carbide endmills.
- ECA-F-2 : 2 flute, 55° helix medium length solid carbide endmills. Used for machining aluminum.
- MM EC-3 : MULTI-MASTER, 3 flute, 45° helix, interchangeable solid carbide endmill heads.
- MM EC-4 : MULTI-MASTER 4 flute, 30° and 45° helix, interchangeable solid carbide endmill heads with
- MM EC-6 : MULTI-MASTER 6 flute, 30° and 45° helix, interchangeable solid carbide endmill heads with
- MM EC-D : MULTI-MASTER 6, 8,10 flute, interchangeable solid carbide endmill heads with 50° Helix, f
- MM EC-8/MM EC-10 : MULTI-MASTER 8, 10 flute, 30°and 45° helix, interchangeable solid carbide endmil
- MM EC-CF : MULTI-MASTER interchangeable solid carbide head, 4 flute, 38° helix with variable pitch
- MM EFS-CF : 4 flute, 38° helix with variable pitch, interchangeable solid carbide heads. Used for c
- MM EFS : FINISHRED, combination of roughing and finishing interchangeable solid carbide endmill hea
- MM HC : MULTI-MASTER, interchangeable, solid carbide slot drill milling heads with two 10° helix fl
- MM ECU : MULTI-MASTER, 3 flute, undersized interchangeable solid carbide heads for keyways (DIN 688
- MM ERS : MULTI-MASTER interchangeable solid carbide, rough milling heads, used for high metal remov
- MM ERA : MULTI-MASTER interchangeable solid carbide rough milling heads, used for machining aluminu
- MM EA-CF : CHATTERFREE, MULTI-MASTER interchangeable solid carbide heads. 3 flute with 40° variable
- MM EA : MULTI-MASTER, Interchangeable solid carbide slot drill milling heads with two or three 45°
- T290 LNK-05 : Extended flute endmills with T290 LNMT/HT 0502... tangentially clamped inserts.
- T490 LNK-13-BT : Extended flute endmills with BT MAS-403 tapered shanks carrying T490 LNMT/LNHT 13.
- T490 LNK-13-C# : Extended flute endmills with CAMFIX shanks using T490 LNMT/LNHT 13... tangentially
- T490 LNK-13 : Extended flute endmills using T490 LNMT/LNHT 13... tangentially clamped inserts with
- T490 LNK-CF-13 : Extended flute endmills with CLICKFIT shanks, carrying T490 LNMT/HT 1306... tangen
- T490 SM-13 : Extended flute shell mills with T490 LNMT/HT 1306... tangentially clamped inserts (HEL
- T490 LNM-08 : Extended flute endmills with T490 LNMT/HT 08... tangentially clamped inserts.
- SM : HELI2000, Extended flute shell mills with HM90 ADKT 1505... inserts.
- APK-FE : Extended flute endmills with HELIMILL APKT/R-10... inserts.
- ADK : Extended flute cutters with HELIMILL ADKT/R-15.. inserts
- 3M AXK-13 : MILL2000, Heavy duty, extended flute endmills carrying 3M AXKT 1304... inserts with dov
- 3M AXK-CF-13 : MILL2000, Heavy duty, extended flute endmills with CLICKFIT shanks carrying 3M AXKT
- 3M SM : MILL2000, Heavy duty extended flute shell mills carrying 3M AXKT 1304.../2006... inserts wi
- SM-16 : Extended flute shell mills used for machining aluminum, with HM90 APCR 1605... inserts (HEL
- SM-22 : Extended flute shell mills, used for machining aluminum, carrying HM90 APCR 2206... inserts
- APK-22 : Extended flute endmills, used for machining aluminum, carrying HM90 APCR 2206... inserts (
- XOK : Extended flute endmills with S/Q/XOMT-06.. inserts.
- XOK-AL : Long Extended flute endmills, used for machining aluminum, carrying S/X/QOMT-06... inserts
- HP ANK-07 : Extended flute endmills with HELIPLUS HP ANK-07... inserts.
- HP ADK-19 : Extended flute cutters with HELIPLUS HP ADCT/ADKT 1906... inserts.
- H490 F90AX-12 : 90° face mills using H490 ANKX 12.. double-sided, rectangular inserts with 4 helica
- H490 F90AX-17 : 90° face mills using H490 ANKX 17.. double-sided rectangular inserts with 4 helical
- T290 FLN-10 : SUMOMILL, 90° face mills with tangentially clamped, T290 LNMT 1004... inserts with 2
- T490 FLN-08 : 90° face mills with tangentially clamped inserts.
- T490 FLN-13 : HELITANG T490 Line, 90° face mills using T490 LNMT/LNHT 13... tangentially clamped in
- T290 FLN-15 : SUMOMILL, 90° face mills with tangentially clamped, T290 LNMT 1506... inserts with 2
- T490 FLN-16 : HELITANG T490 Line, 90° face mills using T490 LNMT 16... tangentially clamped inserts
- F90LN-N11 : TANGMILL, 90° face mills with LN..1106... tangentially clamped inserts.
- F90LN-N15 : TANGMILL, 90° face mills with LN..1506... tangentially clamped inserts.
- HM90 F90AP-10 : HELI2000, 90° face mills with HM90 APKT 1003... inserts.
- HM90 F90A-15 : HELI2000, 90° face mills with HM90 ADKT 1505... inserts.
- F90AD-SFR : Adjustable face mills (used mainly for PCD/CBN inserts). The adjustable tools provide e
- F90SP-10 : HELIQUAD, 90° face mills with S/X/QPMT 1004... inserts.
- ETR-A2 : 2 flute toroidal endmills
- F90SD-12 : HELIQUAD, 90° face mills with S/QDM. 12... inserts.
- F90SD-16 : HELIQUAD, 90° face mills using SDMT 1606... inserts.
- HP F90AN-07 : HELIPLUS, 90° fine pitch face mills with HP ANKT 0702.. inserts.
- HP F90AT-19 : HELIPLUS, 90° face mills with HP AD.. 1906... long edged inserts.
- HP F90AT-22 : HELIPLUS, 90° face mills with HP AD.. 2207... long edged inserts.
- 3M F90AX-13 : MILL2000, Heavy duty 90° face mills with 3M AXKT 1304.. inserts with dovetail section
- 3M F90AX-20 : MILL2000, Heavy duty 90° face mills using 3M AXKT 206.. inserts with dovetail section
- FCM : CHAMMILL, multi-functional face mills for four different insert contours.
- F90 : 90° face mills with TPKN/R inserts.
- SSB : Single-side cutting, disk type slotting cutters carrying square inserts.
- HM90 FAL-16BR : Face mills for machining aluminum, carrying inserts with corner radii equal or larg
- HM90 FAL-22 : Face mills used for machining aluminum, with HM90 APCR 2206... inserts (HELIALU).
- HM90 FAL-15 : Face mills with HM90 AXCR 1505.. HELIALU inserts for machining aluminum.
- F90LN-FR CA11 : Adjustable 90° face mills (used mainly for PCD/CBN inserts)
- Milling - Slanted shoulder. & chamfer.
- E45X : 45° chamfering endmills with X/Q/SOMT 06 inserts.
- E30 / T230 : 30° chamfering endmills.
- E45 / T245 : 45° chamfering endmills.
- E60 / T260 : 60° chamfering endmills.
- ECM : CHAMMILL endmills for four insert shapes. Part of the CHAMELEON multi-functional line.
- S865 FSN-13 : HELIDO, Face mills carrying inserts with 8 cutting edges. A very efficient solution f
- FCM : CHAMMILL, multi-functional face mills for four different insert contours.
- E45KT : HELIOCTO, 45° endmills, using octagonal or round inserts.
- F45KT : HELIOCTO, 45° face mills, using octagonal or round inserts.
- HOF : HELIOCTO, Face mills using octagonal, round and high feed segmented radius inserts.
- F45NM : 16MILL, screw lock, 45° face mills, using Octagonal ONHU/MU 0806... inserts with 16 cutting
- F45WG : 16MILL, wedge lock, 45° face mills, using Octagonal ONHU/MU 0806... inserts with 16 cutting
- F45E (Endmill) : 45° endmills with SEKN/R 12... inserts.
- F45E : 45° face mills with SEKN/R 12... inserts.
- F45ST (endmill) : 45° screw clamped endmills with SEK/MT 12... inserts.
- F45ST : 45° screw clamped face mills with SEK/MT 12... inserts.
- SOE45 8/16 : 45° endmills using square or octagonal double-sided inserts with 8/16 cutting edges (H
- SOF45CL : 45° face mills, using square or octagonal double-sided inserts with 8/16 cutting edges (H
- SOF45 : 45° face mills, using square or octagonal double-sided inserts with 8/16 cutting edges (HEL
- S845 E45SX-16 : HELIDO 45° face mills using inserts with 8 helical right-hand cutting edges, provid
- S845 F45SX-16 : 45° face mills, featuring very rigid clamping, carrying inserts with 8 helical, rig
- F45LN-N15 : TANGMILL, 45° face mills with LN..1506... tangentially clamped inserts.
- F45AD : HELIMILL, 45° face mills with AD..-1505... inserts.
- 3M E45AX-20 : MILL2000, Heavy duty 45° endmills using 3M AXKT 2006... inserts with dovetail section
- 3M F45AX-20 : MILL2000, Heavy duty 45° face mills using 3M AXKT 2006... inserts with dovetail secti
- MM HCD : MULTI-MASTER, 2 flute interchangeable solid carbide heads, for chamfering, countersinking
- MM ECF : MULTI-MASTER interchangeable solid carbide heads, for chamfering and countersinking.
- MM HCF : Interchangeable 2 flute, solid carbide chamfering head with a MULTI-MASTER adaptation.
- ECT-A2 : 2 flute, 30° taper helix solid carbide endmills. Used on hardened steel.
- ECM-CF : CHAMMILL endmills for four insert shapes with a CLICKFIT adaptation.
- ECT-T4 : 4 flute, 25° taper helix solid carbide endmills. Used for rib processing on hardened steel
- Milling - Slotting
- TS T290 ELN : SUMOMILL endmill heads with tangentially clamped inserts and SHANK-MASTER threaded ad
- T290 ELN-MM-05 : Endmills with tangentially clamped inserts and MULTI-MASTER adaptation.
- T290 ELN-05 : Endmills with Tangentially Clamped Inserts.
- T290 ELN-M-05 : Endmills with tangentially clamped inserts and FLEXFIT adaptation.
- T490 ELN-08 : HELITANG T490 Line, 90° face mills using T490 LNMT/LNHT 08... tangentially clamped in
- T490 ELN-MM..-08 : HELITANG, 90° endmills with a MULTI-MASTER threaded adaptation using T490 LNMT/L
- T490 ELN-M-08 : HELITANG, 90° endmills with a FLEXFIT threaded adaptation using T490 LNMT/LNHT 08..
- T290 ELN-10 : SUMOMILL Endmills with tangentially clamped inserts.
- H490 E90AX-09 : 90° endmills using H490 ANKX 09... double-sided rectangular inserts with 4 helical
- H490 E90AX-12 : 90° endmills using the H490 ANKX 12...double-sided rectangular inserts with 4 helic
- H490 E90AX-M : 90° endmills with FLEXFIT threaded connection, using H490 ANKX/ANCX 09... double-sid
- H490 E90AX-MM : 90° endmills with MULTI-MASTER threaded connection, using H490 ANKX/ANCX 09 double-
- T490 ELN-13 : 90° endmills using T490 LNMT/LNHT 13... tangentially clamped inserts with 4 helical,
- T490 ELN-13-C# : 90° endmills with CAMFIX shanks using T490 LNMT/LNHT 13... tangentially clamped in
- T490 ELN-CF-13 : Endmills with a CLICKFIT adaptation and Tangentially Clamped Inserts
- HM90 E90A-10 : HELI2000 endmills for HM90 AP.. 1003... inserts.
- HM90 E90A-CF-10 : HELI2000 endmills with a CLICKFIT adaptation for HM90 AP.. 1003... inserts.
- HM90 E90A-MM-10 : HELI2000 90° endmills with a MULTI-MASTER threaded adaptation for HM90 AP.. 1003.
- HM90 E90A-M-10 : HELI2000 90° endmills with a FLEXFIT threaded adaptation for HM90 AP.. 1003... ins
- HM90 E90AD-15 : HELI2000, 90° endmills for HM90 ADKT-1505... inserts.
- HM90 E90AD-CF-15 : HELI2000, 90° endmills with a CLICKFIT adaptation for HM90 ADKT-1505... inserts.
- HM90 E90AD-M-15 : HELI2000, 90° endmills with a FLEXFIT threaded adaptation for HM90 ADKT-1505... i
- H490 E90AX-17 : HELIDO 90° endmills using the H490 ANKX 17...double-sided rectangular inserts with
- H490 E90AX-17-C# : 90° endmills with CAMFIX shanks that use H490 ANKX 17... double-sided rectangula
- H490 ANKD-C# : Extended flute endmills with CAMFIX shanks using the H490 ANKX 17...double-sided rec
- T490 ELN-16 : 90° endmills using T490 LNMT 16... tangentially clamped inserts with 4 helical, 16 mm
- HP E90AN-07 : Endmills using HELIPLUS HP ANKT 0702.. inserts. Extra fine pitch endmills with very t
- HP E90AN-MM-07 : 90° endmills with a MULTI-MASTER threaded adaptation using HELIPLUS HP ANKT 0702..
- TS HP E90AN : HELIPLUS 90° milling heads with SHANK-MASTER threaded adaptation, using HP ANKT 0702.
- HP E90AN-M-07 : 90° endmills with a FLEXFIT threaded adaptation using HELIPLUS HP ANKT 0702.. inser
- E90X : Endmills with square Q/S/XOMT inserts.
- E90SP : HELIQUAD endmills with S/XPMT inserts.
- 3M E90AX : MILL2000, 90° endmills heavy duty pocket design: dovetail section, inserts with helical
- 3M E90AX-CF : MILL2000, 90° endmills with a CLICKFIT adaptation, heavy duty pocket design: dovetail
- HCE : BALLPLUS, multifunction endmills which can carry ball nose, 90° and toroidal inserts.
- HCE-MM : BALLPLUS, multifunction endmills with a MULTI-MASTER threaded ddaptation which can carry b
- HCE-M : BALLPLUS, multifunction endmills with a FLEXFIT threaded ddaptation which can carry ball no
- ECM : CHAMMILL endmills for four insert shapes. Part of the CHAMELEON multi-functional line.
- ECM-CF : CHAMMILL endmills for four insert shapes with a CLICKFIT adaptation.
- HP E90AT-19 : HELIPLUS, 90° endmills carrying the HP AD.. 1906.. inserts with 18 mm long, helical c
- HP E90AT-CF-19 : HELIPLUS, 90° endmills with a CLICKFIT adaptation carrying the HP AD.. 1906.. inse
- HP E90AT-22 : HELIPLUS, 90° endmills carrying the HP AD.. 2207.. inserts with 22 mm long, helical c
- HP E90AT-CF-22 : HELIPLUS, 90° endmills with a CLICKFIT adaptation carrying the HP AD.. 2207.. inse
- HM90 EAL-15 : Long reach endmills used for machining aluminum, with HM90 AXCR 1505... inserts (HELI
- HM90 EAL-16 : Long reach endmills for machining aluminum, with HM90 APCR 1605 HELIALU inserts.
- HM90 EAL-CF4-16 : Long reach endmills with CLICKFIT Adaptation for machining aluminum, carrying HM9
- HM90 EAL-16BR : Long reach endmills, used for machining aluminum, carrying HM90 APCR 1605... insert
- HM90 EAL-HSK63A-15 : Long reach endmills with integral HSK adaptation, used for machining aluminum,
- HM90 EAL-HSK63A-16 : Long reach endmills with integral HSK adaptation, used for machining aluminum,
- ECA-H3-CF : CHATTERFREE, 3 flute solid carbide endmills with 39-41° different helix, 3, 4 and 5xD n
- EC-H4M-CFR : 4 flute endmills with different helix (35° & 37°) and variable pitch for chatter d
- EC-E4L-CF : 4 flute, 38° helix with variable pitch for roughing and finishing operations. High mate
- EC-H4L-CFR (Relieved neck) : 4 flute endmills with different helix (35° & 37°) and variable pit
- EC-H4XL-CFR (Relieved neck) : 4 flute long endmills with different helix (35° & 37°) and variab
- EC-E5L-CF : 5 flute, 38° helix with variable pitch for roughing and finishing operations. High mate
- EFS-B44 : FINISHRED, combination of roughing and finishing solid carbide endmill in a single tool.
- EFS-E44 : Combination of roughing and finishing solid carbide endmill in a single tool. 4 variable
- ECP-E4L : 4 flute, 38° helix medium length solid carbide roughing endmills with chip splitting cutt
- ECP-E3L : 3 flute, 38° helix medium length solid carbide roughing endmills with chip splitting cutt
- ECR-B-S : 4-7 Flute, 45° Helix, Short Length (1xD) Solid Carbide Roughing Endmills 4-7 flute, 45° h
- ECC-A-2 : 2 flute, 30° helix medium length solid carbide slot / drill endmills with chamfered corne
- ECR-B-M/ECR-B-M...R : 4-7 flute, 45° helix medium length (2xd) solid carbide roughing endmills. Use
- ECR-B-L : 4-7 flute 45° helix, long reach (3xd) solid carbide roughing endmills. Used for high stoc
- ECR-B-X : 4-5 flute, 45° helix extra long reach (4xd) solid carbide roughing endmills. Used for hig
- ECR-B-MF : Solid carbide roughing endmills with 4 and 6 flute, 45° helix, medium length (2xD). Used
- ECR-T-M : 4 flute, 20° helix medium length Solid carbide roughing endmills. Used for high stock rem
- ERF-A/E-3,4,6 : 3, 4, 6 flute, 30° and 38° helix, fine pitch, medium length solid carbide roughing
- ECR-B3-R : 3 flute, 45° helix solid carbide roughing endmills. Used for high stock removal rates on
- ERC-E-3 : 3 flute, 38° helix, medium length, solid carbide roughing endmills. Used for maximum stoc
- ECS/ECCS-E-3 : 3 flute, 38° helix short solid carbide slot / drill endmills with chamfered corners.
- EC-A-2 : 2 flute, 30 and 45° helix medium length solid carbide slot / drill endmills.
- EFF-S4 : High productivity solid carbide endmills. Can operate at feed rates up to 0.5 mm/tooth, at
- ECC-A-4 : 4 flute, 30° helix medium length solid carbide endmills with chamfered corners.
- EC-E-3 : 3 flute, 38° helix medium length solid carbide endmills.
- ECC-E-3 : 3 flute, 38° helix medium length slot / drill solid carbide endmills with chamfered corne
- ECU-E-3 : 3 flute, 38° helix short undersized slot / drill solid carbide endmills.
- ECU-E-3-R : 3 flute, 38° helix short undersized slot / drill solid carbide endmills with various ra
- EC-B-3 : 3 flute, 45° helix medium length slot / drill solid carbide endmills.
- EC-B-3...R : 3 flute, 45° helix medium length slot / drill solid carbide endmills with various radi
- EC-B-4 : 4 flute, 45° helix medium length solid carbide endmills.
- EC-B-4...R : 4 flute, 45° helix medium length solid carbide endmills with various radii.
- EC-A-4 : 4 flute, 30° helix medium length solid carbide endmills.
- EC-A2 (Rib Processing) : 2 flute, 30° helix solid carbide endmills. Used for rib processing on hard
- EC-A2 (Medium Length) : 2 flute, 30° helix medium length, solid carbide endmills for hard materials
- EC-A2(Economical-Extra Long) : SOLIDECO - economical type 2 flute, 30° helix center cutting extra l
- EC-A2 (Economical-Medium) : SOLIDECO - economical type 2 flute, 30° helix center cutting medium len
- EC-A2 (Economical-Short) : SOLIDECO - economical type 2 flute, 30° helix center cutting short solid
- EC-A4 : 4 flute, 30° helix medium length solid carbide endmills. Used for hard materials up to 65 H
- EC-A4(Economical-Extra Long) : SOLIDECO - economical type, 3 flute 45° helix center cutting extra l
- EC-A4 (Economical-Medium) : SOLIDECO - economical type 3 flute, 45° helix center cutting medium len
- EC-B4-R : 4 flute, 45° helix extra-long solid carbide endmills with various corner radii. Used on h
- ECA-B-3 : 3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
- EFP-E4,5CF : 4, 5 flute 38° helix, sold carbide roughing endmills with chip splitting cutting edges
- ECA-F-2 : 2 flute, 55° helix medium length solid carbide endmills. Used for machining aluminum.
- ECA-B-2 : 2 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
- MM EC-3 : MULTI-MASTER, 3 flute, 45° helix, interchangeable solid carbide endmill heads.
- MM EC-4 : MULTI-MASTER 4 flute, 30° and 45° helix, interchangeable solid carbide endmill heads with
- MM EC-6 : MULTI-MASTER 6 flute, 30° and 45° helix, interchangeable solid carbide endmill heads with
- MM EC-D : MULTI-MASTER 6, 8,10 flute, interchangeable solid carbide endmill heads with 50° Helix, f
- MM EC-8/MM EC-10 : MULTI-MASTER 8, 10 flute, 30°and 45° helix, interchangeable solid carbide endmil
- MM EC-CF : MULTI-MASTER interchangeable solid carbide head, 4 flute, 38° helix with variable pitch
- MM EFS-CF : 4 flute, 38° helix with variable pitch, interchangeable solid carbide heads. Used for c
- MM EFS : FINISHRED, combination of roughing and finishing interchangeable solid carbide endmill hea
- MM HC : MULTI-MASTER, interchangeable, solid carbide slot drill milling heads with two 10° helix fl
- MM ECU : MULTI-MASTER, 3 flute, undersized interchangeable solid carbide heads for keyways (DIN 688
- MM ERS : MULTI-MASTER interchangeable solid carbide, rough milling heads, used for high metal remov
- MM EA-CF : CHATTERFREE, MULTI-MASTER interchangeable solid carbide heads. 3 flute with 40° variable
- MM EA : MULTI-MASTER, Interchangeable solid carbide slot drill milling heads with two or three 45°
- MM HT-NCSR : 2 flute chip splitting toroidal, solid carbide milling heads.
- MM HT-NWFR : MULTI-MASTER, 2 flute, toroidal, solid carbide milling heads with a side tangential wi
- MM HT : MULTI-MASTER, Torodial 2 flute Interchangeable solid carbide milling heads.
- MM ETR : MULTI-MASTER Torodial 6 flute interchangeable solid carbide milling heads
- MM FF : MULTI-MASTER, 2 flute, FEEDMILL, interchangeable solid carbide heads. Used for milling at v
- MM EFF : MULTI-MASTER, 4 flute, FEEDMILL, interchangeable solid carbide heads. Used for milling at
- SM : HELI2000, Extended flute shell mills with HM90 ADKT 1505... inserts.
- APK-FE : Extended flute endmills with HELIMILL APKT/R-10... inserts.
- ADK : Extended flute cutters with HELIMILL ADKT/R-15.. inserts
- 3M AXK-13 : MILL2000, Heavy duty, extended flute endmills carrying 3M AXKT 1304... inserts with dov
- 3M AXK-CF-13 : MILL2000, Heavy duty, extended flute endmills with CLICKFIT shanks carrying 3M AXKT
- 3M SM : MILL2000, Heavy duty extended flute shell mills carrying 3M AXKT 1304.../2006... inserts wi
- APK-22 : Extended flute endmills, used for machining aluminum, carrying HM90 APCR 2206... inserts (
- XOK : Extended flute endmills with S/Q/XOMT-06.. inserts.
- XOK-AL : Long Extended flute endmills, used for machining aluminum, carrying S/X/QOMT-06... inserts
- HP ANK-07 : Extended flute endmills with HELIPLUS HP ANK-07... inserts.
- HP ADK-19 : Extended flute cutters with HELIPLUS HP ADCT/ADKT 1906... inserts.
- H490 F90AX-12 : 90° face mills using H490 ANKX 12.. double-sided, rectangular inserts with 4 helica
- H490 F90AX-17 : 90° face mills using H490 ANKX 17.. double-sided rectangular inserts with 4 helical
- T290 FLN-10 : SUMOMILL, 90° face mills with tangentially clamped, T290 LNMT 1004... inserts with 2
- T490 FLN-08 : 90° face mills with tangentially clamped inserts.
- T490 FLN-13 : HELITANG T490 Line, 90° face mills using T490 LNMT/LNHT 13... tangentially clamped in
- T290 FLN-15 : SUMOMILL, 90° face mills with tangentially clamped, T290 LNMT 1506... inserts with 2
- T490 FLN-16 : HELITANG T490 Line, 90° face mills using T490 LNMT 16... tangentially clamped inserts
- F90LN-N11 : TANGMILL, 90° face mills with LN..1106... tangentially clamped inserts.
- F90LN-N15 : TANGMILL, 90° face mills with LN..1506... tangentially clamped inserts.
- HM90 F90AP-10 : HELI2000, 90° face mills with HM90 APKT 1003... inserts.
- HM90 F90A-15 : HELI2000, 90° face mills with HM90 ADKT 1505... inserts.
- F90SP-10 : HELIQUAD, 90° face mills with S/X/QPMT 1004... inserts.
- F90SD-12 : HELIQUAD, 90° face mills with S/QDM. 12... inserts.
- F90SD-16 : HELIQUAD, 90° face mills using SDMT 1606... inserts.
- HP F90AN-07 : HELIPLUS, 90° fine pitch face mills with HP ANKT 0702.. inserts.
- HP F90AT-19 : HELIPLUS, 90° face mills with HP AD.. 1906... long edged inserts.
- HP F90AT-22 : HELIPLUS, 90° face mills with HP AD.. 2207... long edged inserts.
- 3M F90AX-13 : MILL2000, Heavy duty 90° face mills with 3M AXKT 1304.. inserts with dovetail section
- 3M F90AX-20 : MILL2000, Heavy duty 90° face mills using 3M AXKT 206.. inserts with dovetail section
- FCM : CHAMMILL, multi-functional face mills for four different insert contours.
- F90 : 90° face mills with TPKN/R inserts.
- HM90 FAL-16 : Face mills used for machining aluminum, with HM90 APCR 1605... HELIALU inserts.
- HM90 FAL-16BR : Face mills for machining aluminum, carrying inserts with corner radii equal or larg
- HM90 FAL-22 : Face mills used for machining aluminum, with HM90 APCR 2206... inserts (HELIALU).
- HM90 FAL-15 : Face mills with HM90 AXCR 1505.. HELIALU inserts for machining aluminum.
- H490 F90AX-09 : 90° face mills using the H490 ANKX 09.. double-sided rectangular inserts with 4 hel
- F90LN-FR CA11 : Adjustable 90° face mills (used mainly for PCD/CBN inserts)
- Milling - Counter boring
- HM90 E90A-10 : HELI2000 endmills for HM90 AP.. 1003... inserts.
- HM90 E90A-MM-10 : HELI2000 90° endmills with a MULTI-MASTER threaded adaptation for HM90 AP.. 1003.
- HM90 E90A-M-10 : HELI2000 90° endmills with a FLEXFIT threaded adaptation for HM90 AP.. 1003... ins
- HM90 F90AP-10 : HELI2000, 90° face mills with HM90 APKT 1003... inserts.
- HM90 E90AD-15 : HELI2000, 90° endmills for HM90 ADKT-1505... inserts.
- HM90 E90AD-CF-15 : HELI2000, 90° endmills with a CLICKFIT adaptation for HM90 ADKT-1505... inserts.
- HM90 E90AD-M-15 : HELI2000, 90° endmills with a FLEXFIT threaded adaptation for HM90 ADKT-1505... i
- HP F90AN-07 : HELIPLUS, 90° fine pitch face mills with HP ANKT 0702.. inserts.
- HP F90AT-19 : HELIPLUS, 90° face mills with HP AD.. 1906... long edged inserts.
- HP F90AT-22 : HELIPLUS, 90° face mills with HP AD.. 2207... long edged inserts.
- 3M E90AX : MILL2000, 90° endmills heavy duty pocket design: dovetail section, inserts with helical
- 3M E90AX-CF : MILL2000, 90° endmills with a CLICKFIT adaptation, heavy duty pocket design: dovetail
- E90XC : Drilling endmills with square S/XOMT inserts.
- H490 E90AX-17 : HELIDO 90° endmills using the H490 ANKX 17...double-sided rectangular inserts with
- H490 E90AX-17-C# : 90° endmills with CAMFIX shanks that use H490 ANKX 17... double-sided rectangula
- ECR-B-S : 4-7 Flute, 45° Helix, Short Length (1xD) Solid Carbide Roughing Endmills 4-7 flute, 45° h
- ECR-B-M/ECR-B-M...R : 4-7 flute, 45° helix medium length (2xd) solid carbide roughing endmills. Use
- ECR-B-L : 4-7 flute 45° helix, long reach (3xd) solid carbide roughing endmills. Used for high stoc
- ECR-B-X : 4-5 flute, 45° helix extra long reach (4xd) solid carbide roughing endmills. Used for hig
- ECR-B-MF : Solid carbide roughing endmills with 4 and 6 flute, 45° helix, medium length (2xD). Used
- ECR-T-M : 4 flute, 20° helix medium length Solid carbide roughing endmills. Used for high stock rem
- ERF-A/E-3,4,6 : 3, 4, 6 flute, 30° and 38° helix, fine pitch, medium length solid carbide roughing
- ECR-B3-R : 3 flute, 45° helix solid carbide roughing endmills. Used for high stock removal rates on
- EFF-S4 : High productivity solid carbide endmills. Can operate at feed rates up to 0.5 mm/tooth, at
- Milling - Countersinking
- E45X : 45° chamfering endmills with X/Q/SOMT 06 inserts.
- E45 / T245 : 45° chamfering endmills.
- E30 / T230 : 30° chamfering endmills.
- E60 / T260 : 60° chamfering endmills.
- ECF../45 : 45° chamfering and countersinking solid carbide endmills.
- MM HCD : MULTI-MASTER, 2 flute interchangeable solid carbide heads, for chamfering, countersinking
- MM HCF : Interchangeable 2 flute, solid carbide chamfering head with a MULTI-MASTER adaptation.
- MM ECF : MULTI-MASTER interchangeable solid carbide heads, for chamfering and countersinking.
- MM HDF : MULTI-MASTER, 2 flute, interchangeable solid carbide heads. Used for upper and bottom cham
- MM EDF : MULTI-MASTER 3 flute interchangeable solid carbide heads, used for upper and bottom chamfe
- MM ECS : MULTI-MASTER, centering drill (DIN 332), interchangeable solid carbide heads.
- Milling - Profiling
- HCM D10 : Ball nose multifunction endmills D=10 mm (BALLPLUS). Each tool can carry 5 various millin
- HCM D12 : Ball nose multifunction endmills D=12 mm (BALLPLUS). Each tool can carry 5 various millin
- HCM D16 : Ball nose multifunction endmills D=16 mm (BALLPLUS). Each tool can carry 5 various millin
- HCM D20 : Ball nose multifunction endmills D=20 mm (BALLPLUS). Each tool can carry 5 various millin
- HCM D25 : Ball nose multifunction endmills D=25 mm (BALLPLUS). Each tool can carry 5 various millin
- HCM-MM : Ball nose multifunction endmills with MULTI-MASTER threaded adaptation (BALLPLUS). Each to
- TS HCM : BALLPLUS ball nose multifunction milling heads with SHANK-MASTER threaded connection. Each
- HCM-M : Ball nose multifunction endmills with FLEXFIT threaded adaptation (BALLPLUS). Each tool can
- H400 ER-M : Endmills with FLEXFIT threaded connection, carrying double-sided inserts with four radi
- H400 ER-10 : Endmills carrying double-sided inserts with four 5 mm radius cutting edges (HELIDO ROU
- H400 ER-12 : Endmills carrying double-sided inserts with four 6 mm radius cutting edges (HELIDO ROU
- H400 FR-10 : Face mills carrying double-sided inserts with four 5 mm radius cutting edges (HELIDO R
- H400 FR-12 : Face mills carrying double-sided inserts with four 6 mm radius cutting edges (HELIDO R
- H400 FR-16 : Face mills carrying double-sided inserts with four 8 mm radius cutting edges (HELIDO R
- FTP-LN10 : HELITANG, high feed shell mill, carrying tangentially clamped inserts with 4 cutting edg
- FRW : MILLSHRED - Face mills carrying round inserts with serrated cutting edges or regular round in
- ERW : MILLSHRED-milling cutters which can carry round inserts with serrated cutting edges or regula
- ERW-M : MILLSHRED - Endmills with FLEXFIT threaded adaptation carrying round inserts with serrated
- ER : End mills with round inserts for profiling and milling of round corners (ROUNDMILL).
- ER-M : Endmills with FLEXFIT threaded adaptation carrying round inserts for profiling and milling o
- FR : Face mills with round inserts for profiling and milling of round corners (ROUNDMILL).
- ECM : CHAMMILL endmills for four insert shapes. Part of the CHAMELEON multi-functional line.
- ECM-CF : CHAMMILL endmills for four insert shapes with a CLICKFIT adaptation.
- ERCM : CHAMMILL, Multifunctional coarse-pitch endmills. Can carry four different insert shapes.
- FCM : CHAMMILL, multi-functional face mills for four different insert contours.
- FRCM : CHAMMILL, coarse pitch multi-functional face mills for four different insert contours.
- BCM : DROPMILL, Ball nose endmills carrying tangent straight edge inserts. Used for semi finishing
- BCM-MM : DROPMILL, Ball nose endmills with MULTI-MASTER threaded adaptation carrying tangent straig
- TS BCM : DROPMILL ball nose milling heads with tangent straight edge insert and SHANK-MASTER thread
- BCM-M : DROPMILL, Ball nose endmills with FLEXFIT threaded adaptation carrying tangent straight edg
- CM D10 : Ball nose endmills D=10 mm (HELIBALL).
- CM D08 : Ball nose endmills D=8 mm (HELIBALL).
- CM-D30-50 : Ball nose profiling tools.
- EBRF-T : 3, 4 flutes, 20° helix, long Solid carbide, roughing ball nose. Used for materials up to 5
- EB-A2 (Precision Stub Cut) : 2 Flute 30° helix high precision ball nose, stub cut length, for mater
- EB-A2 (Rib Processing) : 2 flute, 30° helix rib processing solid carbide ball nose endmills. Used f
- EB-A2 (Economical) : SOLIDECO - economical type 2 flute, 30° helix ball nose solid carbide endmills
- EB-A2 (Tapered Flute & Neck) : 2 flute, 30° helix tapered flute and neck, solid carbide ball no
- EB-A2(Economical-Extra Long) : SOLIDECO - economical type 2 flute, 30° helix ball nose extra long s
- EB-A2 (Stub Cut Length) : 2 flute, 30° helix stub cut length, ball nose solid carbide endmills. Use
- EB-A2 (Long with Neck) : 2 flute, 30° helix long solid carbide ball nose endmills with neck. Used f
- EB-A2 (Extra Long) : 2 flute, 30° helix extra long solid carbide ball nose endmills. Used for mater
- ESB-A2 : 2 flute, 30° helix spherical long solid carbide ball nose endmills. Used for materials up
- ESB-A4 : 4 flute, 30° helix spherical long solid carbide ball nose endmills. Used for materials up
- EBM-A-2 : 2 flute, 30° helix medium length solid carbide miniature ball nose endmills.
- EB-A-3 : 3 flute, 30° helix short solid carbide ball nose endmills.
- EB-A4 (Economical-Short) : SOLIDECO - economical type 4 flute, 30° helix ball nose short solid carb
- EB-A-4 (Medium Length) : 4 flute, 30° helix medium length solid carbide ball nose endmills.
- EB-A-2 : 2 flute, 30° helix short solid carbide ball nose endmills.
- EB-A-4 (Short Length) : 4 flute, 30° helix short solid carbide ball nose endmills.
- EBL-A-4 : 4 flute, 30° helix long solid carbide ball nose endmills.
- ECT-A2 : 2 flute, 30° taper helix solid carbide endmills. Used on hardened steel.
- ECT-T4 : 4 flute, 25° taper helix solid carbide endmills. Used for rib processing on hardened steel
- EBT-T4 : 4 flute, 25° helix solid carbide tapered ball nose. Used for rib processing on hardened st
- MM EB : MULTI-MASTER interchangeable solid carbide ball nose milling heads.
- MM EBA : 2 flute high precision, MULTI-MASTER interchangeable solid carbide ballnose heads for mach
- MM HCR : MULTI-MASTER interchangeable solid carbide 2 flute, ball nose milling heads.
- MM HBR : MULTI-MASTER, high accuracy (h7 milling head diameter), may be used for both roughing and
- MM ETR : MULTI-MASTER Torodial 6 flute interchangeable solid carbide milling heads
- Milling - "T" Slotting
- ETS-LN08 : MINI-TANGSLOT, Grooving and slitting cutters, carrying tangentially clamped inserts with
- ETS-LN08-M : MINI-TANGSLOT, Grooving and slitting cutters with FLEXFIT threaded adaptation, carryin
- ETS : T-slot endmills.
- MM TS-N : MULTI-MASTER interchangeable solid carbide T-Slot milling heads with chamfered corners.
- MM TS-H : Interchangeable solid carbide T-Slot milling heads with various corner radius and MULTI-M
- MM GRIT-16K/18P : MULTI-MASTER interchangeable solid carbide small diameter, groove milling heads.
- MM GRIT-22K/P,28K : MULTI-MASTER interchangeable solid carbide small diameter, groove milling heads
- Milling - Side slotting
- FDN-CM : Full width slotting cutters flanged type, with round and octagonal inserts.
- SDN-LN08 : Disk type grooving and slitting cutters carrying tangentially clamped inserts with 4 cut
- TRIB : CHAMSLIT, grooving shell mills with triple-edged precision ground inserts.
- TRIB-SM : Grooving shell mills with triple-edged precision ground inserts.
- ETS-LN08 : MINI-TANGSLOT, Grooving and slitting cutters, carrying tangentially clamped inserts with
- ETS-LN08-M : MINI-TANGSLOT, Grooving and slitting cutters with FLEXFIT threaded adaptation, carryin
- SDN-LN12 : Full slot, disk type slotting cutters using LNET 12 tangentially mounted inserts. Narrow
- SDN-CALN12 : Full slot adjustable slotting cutters with cartridges carrying tangentially mounted LN
- FDN-LN12 : Full slot cutters with LNET 12 tangentially mounted inserts. A very effective solution f
- FDN-CALN12 : Full slot, adjustable slotting cutters with cartridges using tangentially clamped LNET
- SDN-CALN11 : Full slot, adjustable slotting cutters with cartridges carrying LNMT 1106... inserts,
- FDN-CALN11 : Full slot, adjustable slotting cutters with cartridges using LNMT 1106 inserts, 14.0-1
- SDN-CALN15 : Full slot adjustable slotting cutters with cartridges carrying tangentially mounted LN
- FDN-CALN15 : Full slot, adjustable slotting cutters with cartridges using LNMT 1506PNTN-HT inserts,
- ETS : T-slot endmills.
- SDN : Full slot, disk type slotting cutters carrying square inserts.
- FDN : HELIQUAD, Full slot, flange-type slotting cutters.
- FDN-CF4 : HELIQUAD, Full slot, flange-type slotting cutters with CLICKFIT adaptation.
- FSB : Bottom-side cutting, flanged type slotting cutters.
- GM : Endmills for groove milling, carrying GIPI/GIFI/TIPI inserts (CUT-GRIP).
- GM-DG : Slitting cutters carrying self-clamped inserts. When used with GIM or GIMY single ended ins
- SGSF-W : Grooving and slitting cutters with integral weldon shanks.
- SGSF : Slitting cutters, with self-clamped inserts (SELF-GRIP).
- TGSF : TANGSLIT slitting cutters with TANG-GRIP inserts.
- MM TS-N : MULTI-MASTER interchangeable solid carbide T-Slot milling heads with chamfered corners.
- MM TS-H : Interchangeable solid carbide T-Slot milling heads with various corner radius and MULTI-M
- MM GRIT-K/P-45A : MULTI-MASTER, interchangeable solid carbide small diameter 45° chamfering heads.
- MM GRIT-22K/P,28K : MULTI-MASTER interchangeable solid carbide small diameter, groove milling heads
- MM GRIT-16K/18P : MULTI-MASTER interchangeable solid carbide small diameter, groove milling heads.
- Milling - Internal groove milling
- MM TS-DG : Double-groove internal grooving heads with threaded connection, for tube sheets of heat
- TRIB : CHAMSLIT, grooving shell mills with triple-edged precision ground inserts.
- TRIB-SM : Grooving shell mills with triple-edged precision ground inserts.
- GM : Endmills for groove milling, carrying GIPI/GIFI/TIPI inserts (CUT-GRIP).
- MM GRIT-16K/18P : MULTI-MASTER interchangeable solid carbide small diameter, groove milling heads.
- MM GRIT-22K/P,28K : MULTI-MASTER interchangeable solid carbide small diameter, groove milling heads
- MM TS-N : MULTI-MASTER interchangeable solid carbide T-Slot milling heads with chamfered corners.
- MM TS-H : Interchangeable solid carbide T-Slot milling heads with various corner radius and MULTI-M
- Milling - Bottom Shouldering
- FDN : HELIQUAD, Full slot, flange-type slotting cutters.
- FDN-CM : Full width slotting cutters flanged type, with round and octagonal inserts.
- SDN : Full slot, disk type slotting cutters carrying square inserts.
- FST : Top-side cutting, flanged type slotting cutters.
- ETS : T-slot endmills.
- SSB : Single-side cutting, disk type slotting cutters carrying square inserts.
- Milling - Slitting
- SDN-LN08 : Disk type grooving and slitting cutters carrying tangentially clamped inserts with 4 cut
- TGSF : TANGSLIT slitting cutters with TANG-GRIP inserts.
- SGSA : Slitting cutters, with GSAN self-clamped inserts.
- SGSF-W : Grooving and slitting cutters with integral weldon shanks.
- SGSF : Slitting cutters, with self-clamped inserts (SELF-GRIP).
- GM-DG : Slitting cutters carrying self-clamped inserts. When used with GIM or GIMY single ended ins
- Milling - Drill mill
- E90XC : Drilling endmills with square S/XOMT inserts.
- E90AC : Drilling endmills with APKT/ADKT inserts.
- HCM D12 : Ball nose multifunction endmills D=12 mm (BALLPLUS). Each tool can carry 5 various millin
- HCM D16 : Ball nose multifunction endmills D=16 mm (BALLPLUS). Each tool can carry 5 various millin
- HCM D20 : Ball nose multifunction endmills D=20 mm (BALLPLUS). Each tool can carry 5 various millin
- HCM D25 : Ball nose multifunction endmills D=25 mm (BALLPLUS). Each tool can carry 5 various millin
- HCM-MM : Ball nose multifunction endmills with MULTI-MASTER threaded adaptation (BALLPLUS). Each to
- TS HCM : BALLPLUS ball nose multifunction milling heads with SHANK-MASTER threaded connection. Each
- HCM-M : Ball nose multifunction endmills with FLEXFIT threaded adaptation (BALLPLUS). Each tool can
- MM HC : MULTI-MASTER, interchangeable, solid carbide slot drill milling heads with two 10° helix fl
- MM EA-CF : CHATTERFREE, MULTI-MASTER interchangeable solid carbide heads. 3 flute with 40° variable
- MM EA : MULTI-MASTER, Interchangeable solid carbide slot drill milling heads with two or three 45°
- MM ECU : MULTI-MASTER, 3 flute, undersized interchangeable solid carbide heads for keyways (DIN 688
- MM EC-3 : MULTI-MASTER, 3 flute, 45° helix, interchangeable solid carbide endmill heads.
- MM EC-4 : MULTI-MASTER 4 flute, 30° and 45° helix, interchangeable solid carbide endmill heads with
- MM HT-NCSR : 2 flute chip splitting toroidal, solid carbide milling heads.
- MM HT-NWFR : MULTI-MASTER, 2 flute, toroidal, solid carbide milling heads with a side tangential wi
- MM HT : MULTI-MASTER, Torodial 2 flute Interchangeable solid carbide milling heads.
- MM HCD : MULTI-MASTER, 2 flute interchangeable solid carbide heads, for chamfering, countersinking
- Milling - Plunging & recessing
- FF EWX-04 : HELIDO UPFEED fast feed endmills, carrying double-sided Inserts with 6 cutting edges.
- FF EWX-05 : HELIDO UPFEED endmills for fast feed, carrying double-sided Inserts with 6 cutting edge
- FF FWX-08 : Fast feed face mills carrying double-sided Inserts with 6 cutting edges (HELIDO UPFEED
- MF FWX-08 : HELIDO UPFEED H600 LINE - moderate feed face mills carrying double-sided inserts with 6
- FF EWX-M-04 : HELIDO UPFEED endmills with FLEXFIT threaded adaptation, forfast feed, carrying doubl
- FF EWX-M-05 : HELIDO UPFEED endmills with FLEXFIT threaded adaptation, for fast feed, carrying doub
- FF EWX-MM-04 : HELIDO UPFEED endmills with MULTI-MASTER threaded adaptation, for fast feed, carryin
- TS FF EWX : HELIDO UPFEED fast feed milling heads with SHANK-MASTER threaded adaptation, carrying d
- ERW : MILLSHRED-milling cutters which can carry round inserts with serrated cutting edges or regula
- ERW-M : MILLSHRED - Endmills with FLEXFIT threaded adaptation carrying round inserts with serrated
- FRW : MILLSHRED - Face mills carrying round inserts with serrated cutting edges or regular round in
- FR : Face mills with round inserts for profiling and milling of round corners (ROUNDMILL).
- E93CN : Toroidal, endmills carrying CNHT...and ENHT...inserts (TORMILL). Used for undercutting, for
- E93CN-MM : Endmills with MULTI-MASTER threaded adaptation carrying toroidal inserts (TORMILL). Used
- E93CN-M : Endmills with FLEXFIT threaded adaptation carrying toroidal inserts (TORMILL). Used for u
- F93CN : 93° face mills carrying toroidal inserts (TORMILL). Used for undercutting, for the finish c
- F45E (Endmill) : 45° endmills with SEKN/R 12... inserts.
- HM90 FAL-15 : Face mills with HM90 AXCR 1505.. HELIALU inserts for machining aluminum.
- HM90 EAL-15 : Long reach endmills used for machining aluminum, with HM90 AXCR 1505... inserts (HELI
- HM90 EAL-ER : Endmills with integral ER collet adaptation, used for machining aluminum.
- HM90 EAL-HSK63A-15 : Long reach endmills with integral HSK adaptation, used for machining aluminum,
- HM90 EAL-16 : Long reach endmills for machining aluminum, with HM90 APCR 1605 HELIALU inserts.
- HM90 EAL-CF4-16 : Long reach endmills with CLICKFIT Adaptation for machining aluminum, carrying HM9
- HM90 EAL-16BR : Long reach endmills, used for machining aluminum, carrying HM90 APCR 1605... insert
- HM90 EAL-HSK63A-16 : Long reach endmills with integral HSK adaptation, used for machining aluminum,
- HM90 FAL-16 : Face mills used for machining aluminum, with HM90 APCR 1605... HELIALU inserts.
- HM90 FAL-16BR : Face mills for machining aluminum, carrying inserts with corner radii equal or larg
- ECR-B-S : 4-7 Flute, 45° Helix, Short Length (1xD) Solid Carbide Roughing Endmills 4-7 flute, 45° h
- ECR-B-L : 4-7 flute 45° helix, long reach (3xd) solid carbide roughing endmills. Used for high stoc
- ECR-B-X : 4-5 flute, 45° helix extra long reach (4xd) solid carbide roughing endmills. Used for hig
- MM FF : MULTI-MASTER, 2 flute, FEEDMILL, interchangeable solid carbide heads. Used for milling at v
- MM EFF : MULTI-MASTER, 4 flute, FEEDMILL, interchangeable solid carbide heads. Used for milling at
- MM EC-3 : MULTI-MASTER, 3 flute, 45° helix, interchangeable solid carbide endmill heads.
- MM EC-4 : MULTI-MASTER 4 flute, 30° and 45° helix, interchangeable solid carbide endmill heads with
- MM HC : MULTI-MASTER, interchangeable, solid carbide slot drill milling heads with two 10° helix fl
- MM ECU : MULTI-MASTER, 3 flute, undersized interchangeable solid carbide heads for keyways (DIN 688
- MM EA : MULTI-MASTER, Interchangeable solid carbide slot drill milling heads with two or three 45°
- MM HT-NCSR : 2 flute chip splitting toroidal, solid carbide milling heads.
- MM HT-NWFR : MULTI-MASTER, 2 flute, toroidal, solid carbide milling heads with a side tangential wi
- MM HT : MULTI-MASTER, Torodial 2 flute Interchangeable solid carbide milling heads.
- Milling - Corner rounding
- Milling - Undercutting
- F93CN : 93° face mills carrying toroidal inserts (TORMILL). Used for undercutting, for the finish c
- E93CN-M : Endmills with FLEXFIT threaded adaptation carrying toroidal inserts (TORMILL). Used for u
- E93CN-MM : Endmills with MULTI-MASTER threaded adaptation carrying toroidal inserts (TORMILL). Used
- E93CN : Toroidal, endmills carrying CNHT...and ENHT...inserts (TORMILL). Used for undercutting, for
- HCE : BALLPLUS, multifunction endmills which can carry ball nose, 90° and toroidal inserts.
- HCE-M : BALLPLUS, multifunction endmills with a FLEXFIT threaded ddaptation which can carry ball no
- HCE-MM : BALLPLUS, multifunction endmills with a MULTI-MASTER threaded ddaptation which can carry b
- Milling - Side plunging
- HTP-R-LN16 : TNGPLUNGE, Shell mill plungers carrying tangentially clamped inserts with 4 cutting ed
- HTP-LN06 : TNGPLUNGE, Side plungers carrying tangentially clamped inserts with 4 cutting edges. 5 m
- HTP-M-LN10 : TNGPLUNGE, Side plungers with FLEXFIT connection carrying tangentially clamped inserts
- HTP-M-LN06 : TNGPLUNGE, Side plungers with FLEXFIT connection carrying tangentially clamped inserts
- TS HTP : TANGPLUNGE side plungers with SHANK-MASTER threaded connection carrying tangentially clamp
- HTP-R-LN10 : TNGPLUNGE, Shell mill plungers carrying tangentially clamped inserts with 4 cutting ed
- PLX : Side shell mill plungers with XCMT 120408TR inserts.
- H490 E90AX-MM : 90° endmills with MULTI-MASTER threaded connection, using H490 ANKX/ANCX 09 double-
- PLX-M : Side plungers with FLEXFIT threaded adaptation carrying XCMT 120408TR inserts.
- FF FWX-08 : Fast feed face mills carrying double-sided Inserts with 6 cutting edges (HELIDO UPFEED
- MF FWX-08 : HELIDO UPFEED H600 LINE - moderate feed face mills carrying double-sided inserts with 6
- FF EWX-04 : HELIDO UPFEED fast feed endmills, carrying double-sided Inserts with 6 cutting edges.
- FF EWX-05 : HELIDO UPFEED endmills for fast feed, carrying double-sided Inserts with 6 cutting edge
- FF EWX-M-04 : HELIDO UPFEED endmills with FLEXFIT threaded adaptation, forfast feed, carrying doubl
- FF EWX-M-05 : HELIDO UPFEED endmills with FLEXFIT threaded adaptation, for fast feed, carrying doub
- FF EWX-MM-04 : HELIDO UPFEED endmills with MULTI-MASTER threaded adaptation, for fast feed, carryin
- TS FF EWX : HELIDO UPFEED fast feed milling heads with SHANK-MASTER threaded adaptation, carrying d
- FTP-LN10 : HELITANG, high feed shell mill, carrying tangentially clamped inserts with 4 cutting edg
- E93CN : Toroidal, endmills carrying CNHT...and ENHT...inserts (TORMILL). Used for undercutting, for
- E93CN-MM : Endmills with MULTI-MASTER threaded adaptation carrying toroidal inserts (TORMILL). Used
- E93CN-M : Endmills with FLEXFIT threaded adaptation carrying toroidal inserts (TORMILL). Used for u
- F93CN : 93° face mills carrying toroidal inserts (TORMILL). Used for undercutting, for the finish c
- H490 E90AX-17 : HELIDO 90° endmills using the H490 ANKX 17...double-sided rectangular inserts with
- H490 E90AX-17-C# : 90° endmills with CAMFIX shanks that use H490 ANKX 17... double-sided rectangula
- H490 F90AX-12 : 90° face mills using H490 ANKX 12.. double-sided, rectangular inserts with 4 helica
- H490 E90AX-12 : 90° endmills using the H490 ANKX 12...double-sided rectangular inserts with 4 helic
- H490 E90AX-M : 90° endmills with FLEXFIT threaded connection, using H490 ANKX/ANCX 09... double-sid
- H490 F90AX-09 : 90° face mills using the H490 ANKX 09.. double-sided rectangular inserts with 4 hel
- H490 E90AX-09 : 90° endmills using H490 ANKX 09... double-sided rectangular inserts with 4 helical
- Milling - Ramp down
- T490 ELN-13 : 90° endmills using T490 LNMT/LNHT 13... tangentially clamped inserts with 4 helical,
- T490 ELN-CF-13 : Endmills with a CLICKFIT adaptation and Tangentially Clamped Inserts
- HM90 E90A-10 : HELI2000 endmills for HM90 AP.. 1003... inserts.
- HM90 E90A-CF-10 : HELI2000 endmills with a CLICKFIT adaptation for HM90 AP.. 1003... inserts.
- HM90 E90A-MM-10 : HELI2000 90° endmills with a MULTI-MASTER threaded adaptation for HM90 AP.. 1003.
- HM90 E90A-M-10 : HELI2000 90° endmills with a FLEXFIT threaded adaptation for HM90 AP.. 1003... ins
- HM90 E90AD-15 : HELI2000, 90° endmills for HM90 ADKT-1505... inserts.
- HM90 E90AD-CF-15 : HELI2000, 90° endmills with a CLICKFIT adaptation for HM90 ADKT-1505... inserts.
- EC-A2 (Economical-Short) : SOLIDECO - economical type 2 flute, 30° helix center cutting short solid
- HM90 E90AD-M-15 : HELI2000, 90° endmills with a FLEXFIT threaded adaptation for HM90 ADKT-1505... i
- HP E90AN-07 : Endmills using HELIPLUS HP ANKT 0702.. inserts. Extra fine pitch endmills with very t
- HP E90AN-MM-07 : 90° endmills with a MULTI-MASTER threaded adaptation using HELIPLUS HP ANKT 0702..
- TS HP E90AN : HELIPLUS 90° milling heads with SHANK-MASTER threaded adaptation, using HP ANKT 0702.
- HP E90AN-M-07 : 90° endmills with a FLEXFIT threaded adaptation using HELIPLUS HP ANKT 0702.. inser
- FF EWX-04 : HELIDO UPFEED fast feed endmills, carrying double-sided Inserts with 6 cutting edges.
- FF EWX-M-05 : HELIDO UPFEED endmills with FLEXFIT threaded adaptation, for fast feed, carrying doub
- FF EWX-M-04 : HELIDO UPFEED endmills with FLEXFIT threaded adaptation, forfast feed, carrying doubl
- FF EWX-MM-04 : HELIDO UPFEED endmills with MULTI-MASTER threaded adaptation, for fast feed, carryin
- FF EWX-05 : HELIDO UPFEED endmills for fast feed, carrying double-sided Inserts with 6 cutting edge
- TS FF EWX : HELIDO UPFEED fast feed milling heads with SHANK-MASTER threaded adaptation, carrying d
- FTP-LN10 : HELITANG, high feed shell mill, carrying tangentially clamped inserts with 4 cutting edg
- H400 ER-10 : Endmills carrying double-sided inserts with four 5 mm radius cutting edges (HELIDO ROU
- H400 ER-12 : Endmills carrying double-sided inserts with four 6 mm radius cutting edges (HELIDO ROU
- H400 ER-M : Endmills with FLEXFIT threaded connection, carrying double-sided inserts with four radi
- FF EW-CF : FEEDMILL endmill with a CLICKFIT adaptation using FF WOMT inserts used for very high met
- FF EW-M : FEEDMILL, fast feed endmills with FLEXFIT threaded adaptation, using FF WOMT... inserts.
- ERW : MILLSHRED-milling cutters which can carry round inserts with serrated cutting edges or regula
- ERW-M : MILLSHRED - Endmills with FLEXFIT threaded adaptation carrying round inserts with serrated
- E90SP : HELIQUAD endmills with S/XPMT inserts.
- E90CN : Toroidal, endmills carrying CNHT...inserts (TORMILL). Used mainly for milling square should
- E93CN : Toroidal, endmills carrying CNHT...and ENHT...inserts (TORMILL). Used for undercutting, for
- E93CN-MM : Endmills with MULTI-MASTER threaded adaptation carrying toroidal inserts (TORMILL). Used
- E90CN-M : Endmills with FLEXFIT threaded adaptation carrying toroidal inserts (TORMILL). Used mainl
- E93CN-M : Endmills with FLEXFIT threaded adaptation carrying toroidal inserts (TORMILL). Used for u
- E90X : Endmills with square Q/S/XOMT inserts.
- ECM : CHAMMILL endmills for four insert shapes. Part of the CHAMELEON multi-functional line.
- ECM-CF : CHAMMILL endmills for four insert shapes with a CLICKFIT adaptation.
- HP E90AT-19 : HELIPLUS, 90° endmills carrying the HP AD.. 1906.. inserts with 18 mm long, helical c
- HP E90AT-CF-19 : HELIPLUS, 90° endmills with a CLICKFIT adaptation carrying the HP AD.. 1906.. inse
- HP E90AT-22 : HELIPLUS, 90° endmills carrying the HP AD.. 2207.. inserts with 22 mm long, helical c
- HP E90AT-CF-22 : HELIPLUS, 90° endmills with a CLICKFIT adaptation carrying the HP AD.. 2207.. inse
- HM90 EAL-22 : Long reach endmills used for machining aluminum, with HM90 APCR 2206... inserts (HELI
- HM90 F90AP-10 : HELI2000, 90° face mills with HM90 APKT 1003... inserts.
- HM90 F90A-15 : HELI2000, 90° face mills with HM90 ADKT 1505... inserts.
- HP F90AN-07 : HELIPLUS, 90° fine pitch face mills with HP ANKT 0702.. inserts.
- FF FWX-08 : Fast feed face mills carrying double-sided Inserts with 6 cutting edges (HELIDO UPFEED
- MF FWX-08 : HELIDO UPFEED H600 LINE - moderate feed face mills carrying double-sided inserts with 6
- H400 FR-10 : Face mills carrying double-sided inserts with four 5 mm radius cutting edges (HELIDO R
- H400 FR-12 : Face mills carrying double-sided inserts with four 6 mm radius cutting edges (HELIDO R
- H400 FR-16 : Face mills carrying double-sided inserts with four 8 mm radius cutting edges (HELIDO R
- FRW : MILLSHRED - Face mills carrying round inserts with serrated cutting edges or regular round in
- F90SP-10 : HELIQUAD, 90° face mills with S/X/QPMT 1004... inserts.
- F93CN : 93° face mills carrying toroidal inserts (TORMILL). Used for undercutting, for the finish c
- FCM : CHAMMILL, multi-functional face mills for four different insert contours.
- FR : Face mills with round inserts for profiling and milling of round corners (ROUNDMILL).
- HP F90AT-19 : HELIPLUS, 90° face mills with HP AD.. 1906... long edged inserts.
- HP F90AT-22 : HELIPLUS, 90° face mills with HP AD.. 2207... long edged inserts.
- HM90 FAL-22 : Face mills used for machining aluminum, with HM90 APCR 2206... inserts (HELIALU).
- ECA-H3-CF : CHATTERFREE, 3 flute solid carbide endmills with 39-41° different helix, 3, 4 and 5xD n
- EC-H4M-CFR : 4 flute endmills with different helix (35° & 37°) and variable pitch for chatter d
- EC-E4L-CF : 4 flute, 38° helix with variable pitch for roughing and finishing operations. High mate
- EC-H4L-CFR (Relieved neck) : 4 flute endmills with different helix (35° & 37°) and variable pit
- EC-H4XL-CFR (Relieved neck) : 4 flute long endmills with different helix (35° & 37°) and variab
- EC-E5L-CF : 5 flute, 38° helix with variable pitch for roughing and finishing operations. High mate
- EFS-B44 : FINISHRED, combination of roughing and finishing solid carbide endmill in a single tool.
- EFS-E44 : Combination of roughing and finishing solid carbide endmill in a single tool. 4 variable
- ECR-B-S : 4-7 Flute, 45° Helix, Short Length (1xD) Solid Carbide Roughing Endmills 4-7 flute, 45° h
- ECR-B-M/ECR-B-M...R : 4-7 flute, 45° helix medium length (2xd) solid carbide roughing endmills. Use
- ECR-B-L : 4-7 flute 45° helix, long reach (3xd) solid carbide roughing endmills. Used for high stoc
- ECR-B-X : 4-5 flute, 45° helix extra long reach (4xd) solid carbide roughing endmills. Used for hig
- ECR-B-MF : Solid carbide roughing endmills with 4 and 6 flute, 45° helix, medium length (2xD). Used
- ECR-T-M : 4 flute, 20° helix medium length Solid carbide roughing endmills. Used for high stock rem
- ERF-A/E-3,4,6 : 3, 4, 6 flute, 30° and 38° helix, fine pitch, medium length solid carbide roughing
- ECR-B3-R : 3 flute, 45° helix solid carbide roughing endmills. Used for high stock removal rates on
- ERC-E-3 : 3 flute, 38° helix, medium length, solid carbide roughing endmills. Used for maximum stoc
- ECS/ECCS-E-3 : 3 flute, 38° helix short solid carbide slot / drill endmills with chamfered corners.
- EC-A-2 : 2 flute, 30 and 45° helix medium length solid carbide slot / drill endmills.
- EFF-S4 : High productivity solid carbide endmills. Can operate at feed rates up to 0.5 mm/tooth, at
- ECC-A-2 : 2 flute, 30° helix medium length solid carbide slot / drill endmills with chamfered corne
- ECC-A-4 : 4 flute, 30° helix medium length solid carbide endmills with chamfered corners.
- EC-E-3 : 3 flute, 38° helix medium length solid carbide endmills.
- ECC-E-3 : 3 flute, 38° helix medium length slot / drill solid carbide endmills with chamfered corne
- ECU-E-3 : 3 flute, 38° helix short undersized slot / drill solid carbide endmills.
- ECU-E-3-R : 3 flute, 38° helix short undersized slot / drill solid carbide endmills with various ra
- EC-B-3 : 3 flute, 45° helix medium length slot / drill solid carbide endmills.
- EC-B3 (Economical-Short) : SOLIDECO - economical type 3 flute, 45° helix center cutting short solid
- EC-B-3...R : 3 flute, 45° helix medium length slot / drill solid carbide endmills with various radi
- EC-B3 (Economical-Medium) : SOLIDECO - economical type 3 flute, 45° helix center cutting medium len
- EC-B-4 : 4 flute, 45° helix medium length solid carbide endmills.
- EC-B-4...R : 4 flute, 45° helix medium length solid carbide endmills with various radii.
- EC-A-4 : 4 flute, 30° helix medium length solid carbide endmills.
- EC-A2 (Rib Processing) : 2 flute, 30° helix solid carbide endmills. Used for rib processing on hard
- EC-A2(Economical-Extra Long) : SOLIDECO - economical type 2 flute, 30° helix center cutting extra l
- EC-A2 (Economical-Medium) : SOLIDECO - economical type 2 flute, 30° helix center cutting medium len
- EC-A2 (Medium Length) : 2 flute, 30° helix medium length, solid carbide endmills for hard materials
- EC-A3/E3 (Economical-Short) : SOLIDECO - economical type 3 flute, 30° and 38° helix center cutting
- EC-A3/E3 (Economical-Medium) : SOLIDECO - economical type 3 flute, 30° and 38° helix, center cuttin
- EC-A4 : 4 flute, 30° helix medium length solid carbide endmills. Used for hard materials up to 65 H
- EC-A-4...R : 4 flute, 30° helix medium length solid carbide endmills with various radii.
- EC-B4-R : 4 flute, 45° helix extra-long solid carbide endmills with various corner radii. Used on h
- ECA-B-3 : 3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
- EFP-E4,5CF : 4, 5 flute 38° helix, sold carbide roughing endmills with chip splitting cutting edges
- ECA-F-2 : 2 flute, 55° helix medium length solid carbide endmills. Used for machining aluminum.
- ECA-B-2 : 2 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
- MM EC-3 : MULTI-MASTER, 3 flute, 45° helix, interchangeable solid carbide endmill heads.
- MM EC-4 : MULTI-MASTER 4 flute, 30° and 45° helix, interchangeable solid carbide endmill heads with
- MM EC-6 : MULTI-MASTER 6 flute, 30° and 45° helix, interchangeable solid carbide endmill heads with
- MM EC-D : MULTI-MASTER 6, 8,10 flute, interchangeable solid carbide endmill heads with 50° Helix, f
- MM EC-8/MM EC-10 : MULTI-MASTER 8, 10 flute, 30°and 45° helix, interchangeable solid carbide endmil
- MM EC-CF : MULTI-MASTER interchangeable solid carbide head, 4 flute, 38° helix with variable pitch
- MM EFS-CF : 4 flute, 38° helix with variable pitch, interchangeable solid carbide heads. Used for c
- MM EFS : FINISHRED, combination of roughing and finishing interchangeable solid carbide endmill hea
- MM HC : MULTI-MASTER, interchangeable, solid carbide slot drill milling heads with two 10° helix fl
- MM ECU : MULTI-MASTER, 3 flute, undersized interchangeable solid carbide heads for keyways (DIN 688
- MM ERS : MULTI-MASTER interchangeable solid carbide, rough milling heads, used for high metal remov
- MM ERA : MULTI-MASTER interchangeable solid carbide rough milling heads, used for machining aluminu
- MM EA-CF : CHATTERFREE, MULTI-MASTER interchangeable solid carbide heads. 3 flute with 40° variable
- MM EA : MULTI-MASTER, Interchangeable solid carbide slot drill milling heads with two or three 45°
- MM HT-NCSR : 2 flute chip splitting toroidal, solid carbide milling heads.
- MM HT-NWFR : MULTI-MASTER, 2 flute, toroidal, solid carbide milling heads with a side tangential wi
- MM HT : MULTI-MASTER, Torodial 2 flute Interchangeable solid carbide milling heads.
- MM ETR : MULTI-MASTER Torodial 6 flute interchangeable solid carbide milling heads
- MM FF : MULTI-MASTER, 2 flute, FEEDMILL, interchangeable solid carbide heads. Used for milling at v
- MM EFF : MULTI-MASTER, 4 flute, FEEDMILL, interchangeable solid carbide heads. Used for milling at
- Hole Making - Drilling
- DCN R-1.5D : SUMOCHAM 1.5xD drills with indexable heads, cylindrical shanks and internal coolant ho
- DCN R-12D : SUMOCHAM 12xD drills with indexable heads, cylindrical shanks and internal coolant hole
- DCN R-3D : SUMOCHAM 3xD drills with indexable heads, cylindrical shanks and internal coolant holes.
- DCN R-5D : SUMOCHAM 5xD drills with indexable heads, cylindrical shanks and internal coolant holes.
- DCN R-8D : SUMOCHAM 12xD drills with indexable heads, cylindrical shanks and internal coolant holes
- DCN A-1.5D : SUMOCHAM 1.5xD drills with indexable heads, Weldon shanks and internal coolant holes.
- DCN A-3D : SUMOCHAM 3xD drills with indexable heads, Weldon shanks and internal coolant holes. Feat
- DCN A-5D : SUMOCHAM 5xD drills with indexable heads, Weldon shanks and internal coolant holes. Feat
- DCN A-8D : SUMOCHAM 8xD drills with indexable heads, Weldon shanks and internal coolant holes. Feat
- DSM-1.5D (10.0-19.9mm 1.5xD) : CHAMDRILLJET 1.5xD drills with indexable heads and internal coolant
- DSM-3D (10.0-19.9 mm 3xD) : CHAMDRILLJET, 3xD drills with indexable heads and internal coolant hole
- DSM-5D (10.0-19.9 mm 5xD) : CHAMDRILLJET 5xD drills with indexable heads and internal coolant holes
- DCM-3D (7.5-25.9 mm) : CHAMDRILL indexable head drills, with 3xD drilling depth.
- DCM-3.5D (7.5-20.9 mm) : UNICHAMDRILL indexable head drills without a flange with 3.5xD drilling de
- DCM-5D (7.5-25.9 mm) : CHAMDRILL, indexable head drills, with 5xD drilling depth.
- DCM-8D (10-25.9 mm) : CHAMDRILL indexable head drills, with 8xD drilling depth.
- DCT (M8-M24) : CHAMDRILL indexable head drills with chamfering insert, mainly for pre-thread holes.
- DR-2D-N (12-60 mm 2xD) : DR-TWIST indexable square insert drills with coolant holes. Drilling depth
- DR-3D-N (12-38 mm 3xD) : DR-TWIST indexable square insert drills with coolant holes. Drilling depth
- DR-4D-T : Indexable insert drills for non-rotating applications. Drilling depth 4xD.
- DR-4D-N (12-60 mm 4xD) : DR-TWIST indexable square insert drills with coolant holes. Drilling depth
- DR-5D-N : DR-TWIST indexable square insert drills with coolant holes. Drilling depth 5xD.
- DR-2XD (53-60 mm 2xD) : DR indexable HELIQUAD insert drills. Drilling depth 2xD.
- DR-3XD-CF (17 & 22 mm 3xD) : Indexable drills with a CLICKFIT adaptation, using square inserts.
- DR-CA-N : Large diameter drills with cartridges. Each drill is supplied with several shim plates. B
- DZ-2.25XD (23-55 mm 2.25xD) : DZ indexable serrated insert drills. Drilling depth 2.25xD.
- DZ-3XD (23-38 mm 3xD) : DZ indexable serrated insert drills. Drilling depth 3xD.
- DZ-4XD (23-33 mm 4xD) : DZ indexable serrated insert drills. Drilling depth 4xD.
- DZ-3XD-CF (25 & 32 mm 3xD) : Drills with CLICKFIT adaptation using triangular inserts with a se
- A-SXFOR-DR : Boring and drilling bars with coolant holes using XOMT inserts.
- DR-MF-2.25D : Multifunction drilling, boring, facing and external turning tool.
- DDT-E1 : Deep double tube conuterborer without a through hole, external 4 start thread connection a
- SCD-AP4 (0.8-2.9 mm 4xD) : Solid carbide drills without coolant holes. Drilling depth 4xD (DIN 6537
- SCCD-AP5 : 3 flute solid carbide drills without coolant holes. Drilling depth 5xD (DIN 6537).
- SCD-AP5 (3-20 mm 5xD) : Solid carbide drills without coolant holes. Drilling depth 5xD.
- SCD-AP6 (0.8-2.9 mm 6xD) : Solid carbide drills without coolant holes. Drilling depth 6xD (DIN 6537
- SCD-ACP20 (5-10 mm 20xD) : Solid carbide drills with coolant holes. Drilling depth 20xD.
- SCD-AP3 (3-20 mm 3xD) : Solid carbide drills without coolant holes. Drilling depth 3xD DIN 6537.
- SCD-ACP-CS (5-7 mm 20xD) : Solid carbide drills with coolant holes. Drilling depth 20-22xD. Designe
- SCD-ACP5 (3-20 mm 5xD) : Solid carbide drills with coolant holes. Drilling depth 5xD.
- SCD-ACP8 (3-10 mm 8xD) : Solid carbide drills with coolant holes. Drilling depth 8xD.
- SCD-AG5 (3.7-20 mm 5xD) : Solid carbide drills without coolant holes. Drilling depth 5xD (DIN 6537)
- SCD-ACG5 (3-20 mm 5xD) : Solid carbide drills with coolant holes. Drilling depth 5xD (DIN 6537).
- SCD-ACG8 (3-10 mm 8xD) : Solid carbide drills with coolant holes. Drilling depth 8xD (DIN 6537).
- SCD-AH5 (3-12 mm 5xD) : Solid carbide drills for hard materials, drilling depth 5xD, without coolan
- SCDR-ACK5 (6.8-20 mm 5xD) : Solid carbide drilling reamers, straight flute, drilling depth 5xD. Use
- SCDR-ACK3 (6.8-20 mm 3xD) : Solid carbide drilling reamers, straight flute, drilling depth 3xD. Use
- HSD-AG6 (H.S.S.) : HSS twist drills 6-9xD, for deep holes in steel, malleable cast iron, aluminum a
- HSD-AG10 (H.S.S.) : HSS twist drills 10-20xD, for very deep holes in steel, malleable cast iron, al
- HSD-AM3 (H.S.S.) : HSS twist drills 3-4xD, for stainless steel, mild steel and aluminum alloys.
- HSD-AM6 (H.S.S.) : HSS twist drills 4-5xD, for stainless steel, mild steel and aluminum alloys.
- SCDT : Pre-thread solid carbide drills with coolant holes.
- MM ECS : MULTI-MASTER, centering drill (DIN 332), interchangeable solid carbide heads.
- Milling - Helical interpolation
- HM90 E90AD-CF-15 : HELI2000, 90° endmills with a CLICKFIT adaptation for HM90 ADKT-1505... inserts.
- HP E90AT-19 : HELIPLUS, 90° endmills carrying the HP AD.. 1906.. inserts with 18 mm long, helical c
- HP E90AT-CF-19 : HELIPLUS, 90° endmills with a CLICKFIT adaptation carrying the HP AD.. 1906.. inse
- HP E90AT-22 : HELIPLUS, 90° endmills carrying the HP AD.. 2207.. inserts with 22 mm long, helical c
- HP E90AT-CF-22 : HELIPLUS, 90° endmills with a CLICKFIT adaptation carrying the HP AD.. 2207.. inse
- FF EWX-04 : HELIDO UPFEED fast feed endmills, carrying double-sided Inserts with 6 cutting edges.
- FF EWX-M-04 : HELIDO UPFEED endmills with FLEXFIT threaded adaptation, forfast feed, carrying doubl
- FF EWX-MM-04 : HELIDO UPFEED endmills with MULTI-MASTER threaded adaptation, for fast feed, carryin
- TS FF EWX : HELIDO UPFEED fast feed milling heads with SHANK-MASTER threaded adaptation, carrying d
- FF EWX-M-05 : HELIDO UPFEED endmills with FLEXFIT threaded adaptation, for fast feed, carrying doub
- FF EWX-05 : HELIDO UPFEED endmills for fast feed, carrying double-sided Inserts with 6 cutting edge
- FF FWX-08 : Fast feed face mills carrying double-sided Inserts with 6 cutting edges (HELIDO UPFEED
- H400 FR-10 : Face mills carrying double-sided inserts with four 5 mm radius cutting edges (HELIDO R
- H400 FR-12 : Face mills carrying double-sided inserts with four 6 mm radius cutting edges (HELIDO R
- H400 FR-16 : Face mills carrying double-sided inserts with four 8 mm radius cutting edges (HELIDO R
- H400 ER-10 : Endmills carrying double-sided inserts with four 5 mm radius cutting edges (HELIDO ROU
- H400 ER-12 : Endmills carrying double-sided inserts with four 6 mm radius cutting edges (HELIDO ROU
- H400 ER-M : Endmills with FLEXFIT threaded connection, carrying double-sided inserts with four radi
- MF FWX-08 : HELIDO UPFEED H600 LINE - moderate feed face mills carrying double-sided inserts with 6
- ER : End mills with round inserts for profiling and milling of round corners (ROUNDMILL).
- ECA-H3-CF : CHATTERFREE, 3 flute solid carbide endmills with 39-41° different helix, 3, 4 and 5xD n
- EC-H4M-CFR : 4 flute endmills with different helix (35° & 37°) and variable pitch for chatter d
- EC-E4L-CF : 4 flute, 38° helix with variable pitch for roughing and finishing operations. High mate
- EC-H4L-CFR (Relieved neck) : 4 flute endmills with different helix (35° & 37°) and variable pit
- EC-E5L-CF : 5 flute, 38° helix with variable pitch for roughing and finishing operations. High mate
- EFS-B44 : FINISHRED, combination of roughing and finishing solid carbide endmill in a single tool.
- EFS-E44 : Combination of roughing and finishing solid carbide endmill in a single tool. 4 variable
- ECR-B-S : 4-7 Flute, 45° Helix, Short Length (1xD) Solid Carbide Roughing Endmills 4-7 flute, 45° h
- ECR-B-M/ECR-B-M...R : 4-7 flute, 45° helix medium length (2xd) solid carbide roughing endmills. Use
- ECR-B-L : 4-7 flute 45° helix, long reach (3xd) solid carbide roughing endmills. Used for high stoc
- ECR-B-X : 4-5 flute, 45° helix extra long reach (4xd) solid carbide roughing endmills. Used for hig
- ECR-B-MF : Solid carbide roughing endmills with 4 and 6 flute, 45° helix, medium length (2xD). Used
- ECR-T-M : 4 flute, 20° helix medium length Solid carbide roughing endmills. Used for high stock rem
- ERF-A/E-3,4,6 : 3, 4, 6 flute, 30° and 38° helix, fine pitch, medium length solid carbide roughing
- ECR-B3-R : 3 flute, 45° helix solid carbide roughing endmills. Used for high stock removal rates on
- ERC-E-3 : 3 flute, 38° helix, medium length, solid carbide roughing endmills. Used for maximum stoc
- ECS/ECCS-E-3 : 3 flute, 38° helix short solid carbide slot / drill endmills with chamfered corners.
- EC-A-2 : 2 flute, 30 and 45° helix medium length solid carbide slot / drill endmills.
- EFF-S4 : High productivity solid carbide endmills. Can operate at feed rates up to 0.5 mm/tooth, at
- ECC-A-2 : 2 flute, 30° helix medium length solid carbide slot / drill endmills with chamfered corne
- ECC-A-4 : 4 flute, 30° helix medium length solid carbide endmills with chamfered corners.
- EC-E-3 : 3 flute, 38° helix medium length solid carbide endmills.
- ECC-E-3 : 3 flute, 38° helix medium length slot / drill solid carbide endmills with chamfered corne
- ECU-E-3-R : 3 flute, 38° helix short undersized slot / drill solid carbide endmills with various ra
- EC-B-3 : 3 flute, 45° helix medium length slot / drill solid carbide endmills.
- EC-B-3...R : 3 flute, 45° helix medium length slot / drill solid carbide endmills with various radi
- EC-B-4 : 4 flute, 45° helix medium length solid carbide endmills.
- EC-B-4...R : 4 flute, 45° helix medium length solid carbide endmills with various radii.
- EC-A-4 : 4 flute, 30° helix medium length solid carbide endmills.
- EC-A2 (Rib Processing) : 2 flute, 30° helix solid carbide endmills. Used for rib processing on hard
- EC-A2 (Medium Length) : 2 flute, 30° helix medium length, solid carbide endmills for hard materials
- EC-A4 : 4 flute, 30° helix medium length solid carbide endmills. Used for hard materials up to 65 H
- EC-B4-R : 4 flute, 45° helix extra-long solid carbide endmills with various corner radii. Used on h
- ECA-B-3 : 3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
- EFP-E4,5CF : 4, 5 flute 38° helix, sold carbide roughing endmills with chip splitting cutting edges
- ECA-F-2 : 2 flute, 55° helix medium length solid carbide endmills. Used for machining aluminum.
- MM EC-3 : MULTI-MASTER, 3 flute, 45° helix, interchangeable solid carbide endmill heads.
- MM EC-4 : MULTI-MASTER 4 flute, 30° and 45° helix, interchangeable solid carbide endmill heads with
- MM EFS-CF : 4 flute, 38° helix with variable pitch, interchangeable solid carbide heads. Used for c
- MM EFS : FINISHRED, combination of roughing and finishing interchangeable solid carbide endmill hea
- MM EC-CF : MULTI-MASTER interchangeable solid carbide head, 4 flute, 38° helix with variable pitch
- MM ECU : MULTI-MASTER, 3 flute, undersized interchangeable solid carbide heads for keyways (DIN 688
- MM ERS : MULTI-MASTER interchangeable solid carbide, rough milling heads, used for high metal remov
- MM HC : MULTI-MASTER, interchangeable, solid carbide slot drill milling heads with two 10° helix fl
- MM HT-NCSR : 2 flute chip splitting toroidal, solid carbide milling heads.
- MM HT-NWFR : MULTI-MASTER, 2 flute, toroidal, solid carbide milling heads with a side tangential wi
- MM HT : MULTI-MASTER, Torodial 2 flute Interchangeable solid carbide milling heads.
- MM ETR : MULTI-MASTER Torodial 6 flute interchangeable solid carbide milling heads
- MM FF : MULTI-MASTER, 2 flute, FEEDMILL, interchangeable solid carbide heads. Used for milling at v
- MM EFF : MULTI-MASTER, 4 flute, FEEDMILL, interchangeable solid carbide heads. Used for milling at
- MM EA-CF : CHATTERFREE, MULTI-MASTER interchangeable solid carbide heads. 3 flute with 40° variable
- MM EA : MULTI-MASTER, Interchangeable solid carbide slot drill milling heads with two or three 45°
- EC-H4XL-CFR (Relieved neck) : 4 flute long endmills with different helix (35° & 37°) and variab
- Milling - External thread milling
- MTEC E-ISO : Solid carbide external threading endmills used for ISO thread profile.
- MTEC E-UN : Solid carbide threading endmills with UN form, for external threading.
- MTECB-W : Solid carbide internal or external threading endmills with coolant holes, used for BSP th
- MTECZ-BSF/BSP : Solid carbide threading endmills with coolant holes located in the flutes, used for
- MTECZ-Whitworth : Solid carbide threading endmills with coolant holes located in the flutes, used f
- MTEC-W : Solid carbide threading endmills, used for internal or external BSP thread profile.
- MTECB-BSPT : Solid carbide external or internal threading endmills with coolant holes, used for BSP
- MTECZ-BSPT : Solid carbide threading endmills with coolant holes located in the flutes, used for in
- MTEC-BSPT : Solid carbide threading endmills, used for external or internal BSPT thread profile.
- MTECZ-NPT : Solid carbide threading endmills with coolant holes located in the flutes, used for int
- MTECB-NPT : Solid carbide threading endmills with coolant holes, used for external or internal NPT
- MTEC-NPT : Solid carbide threading endmills, for external or internal NPT thread profile.
- MTECZ-NPTF : Solid carbide threading endmills with coolant holes located in the flutes, used for in
- MTECB-NPTF : Solid carbide threading endmills with coolant holes, for external or internal NPTF thr
- MTEC-NPTF : Solid carbide threading endmills, for external or internal NPTF thread profile.
- MTSRH (endmills) : End mills for with coolant holes for helical threading inserts
- MTSR : Indexable threading endmills with Weldon shank and coolant holes.
- MTSRH (helical shell mill) : Shell mills for with coolant holes for helical threading inserts.
- MTSR-C : Indexable threading endmills with long cylindrical carbide shanks and coolant holes.
- MTSR-Double Insert : Double insert threading endmills with Weldon shanks.
- MTSR-C-SINGLE : Indexable threading endmills with cylindrical carbide shanks, and coolant holes for
- MTSLE : External multi-tooth threading shell mills.
- MTSR-MULTI (shell mill) : Thread milling, multi-insert shell mills
- MM TRD-W : MULTI-MASTER interchangeable solid carbide milling heads, for 55° partial profile thread
- MM TRD-M : MULTI-MASTER interchangeable solid carbide milling heads, for 60° partial profile thread
- MT-W-MM : Carbide milling heads with a threaded (MULTI-MASTER) connection, for internal and externa
- Hole Making - GUNDRILL
- Hole Making - DEEPDRILL
- DSD-E0 : Deep single tube drills with external single thread connection and a brazed single tip. Ea
- DSD-E1 : Deep, single tube drills with external 2 and 4 start thread connection and a brazed single
- DSD-E3 : Deep single tube drills with external 2 and 4 start thread connection and 3 brazed tips. E
- DSD-EA : Deep single tube drills with external 4 start thread connection, adjustable diameter. Each
- DSD-EC : Deep single tube drills with external 4 start thread connection and cartridges. Each item
- DSD-EI : Deep single tube drills with external 4 start thread connection and indexable inserts. Eac
- DSD-EF : Deep single tube drills with external 4 start thread connection for fast feed. Each item r
- DSC-E1 : Deep single tube counterborer with through hole, external 4 start thread connection and a
- DSC-EC : Deep single tube counterborers with through hole external 4 start thread and a cartridge.
- DSC-EA : Deep single tube counterborers with through hole, external 4 start thread, adjustable diam
- DST-E1 : Deep single tube counterboer with through hole, external 4 start thread connection and 1-b
- DSD-I1 : Deep, single tube drill, with internal single start thread and a brazed tip. Each item rep
- DSD-IA : Deep Single Tube Drills with Internal single start Thread, Adjustable Diameter. Each item
- DSD-IC : Deep single tube drills with internal single start thread and cartridges. Each item repres
- DSC-I1 : Deep, single tube counterborer with through hole, internal single start thread and a braze
- DSC-IA : Deep single tube counterborers with a through hole, internal single start thread, adjustab
- DSC-IC : Deep single tube counterborers with a through hole, internal single Start thread and a car
- DST-I1 : Deep, single tube counterborer without a through hole. Internal single start thread and a
- DDD-E3 : Deep double tube drills with external 4 start thread connection and brazed tips. Each item
- DDD-EC : Deep double tube drills with external 4 start thread connection and cartridges. Each item
- DDD-EF : Deep double tube drills with external 4 start thread for fast feed. Each item represents a
- DDD-EI : Deep double tube drills with external 4 start thread connection and indexable inserts. Eac
- DDC-E1 : Deep double tube conuterborers with a through hole, external 4 start thread connection and
- DDT-E1 : Deep double tube conuterborer without a through hole, external 4 start thread connection a
- Hole Making - Chamfering
- RING DCM : Chamfering ring mounted on the CHAMDRILL drills for drilling and chamfering in one opera
- CHAMRING : Drill Holders used with UNISUMOCHAM or UNICHAMDRILL drills for drilling and chamfering i
- SCDT : Pre-thread solid carbide drills with coolant holes.
- DCT (M8-M24) : CHAMDRILL indexable head drills with chamfering insert, mainly for pre-thread holes.
- Reaming - Through hole
- RM-BNT-3D/5D/8D (Shanks) : Shanks for BAYO T-REAM interchangeable head reamers
- RM-SET-T-B : Single-edged indexable reamers for through holes.
- RM-SHR-H7N-MT : Solid carbide reamers with Morse taper shank, spiral flute DIN 8093. CH - brazed so
- RM-SHR-H7N-CS : Solid carbide reamers with a cylindrical shank, spiral flute - DIN 8093. C - solid
- Reaming - Blind hole
- RM-BNT-3D/5D/8D (Shanks) : Shanks for BAYO T-REAM interchangeable head reamers
- RM-SET-B-B : Single-edged indexable reamers used for blind holes.
- RM-SHR-H7S-MT : Solid carbide reamers with Morse taper shanks. Straight flute according to DIN 8094
- RM-SHR-H7S-CS : Solid carbide reamers with a cylindrical shank, straight flute-DIN 8093. C - solid
- Reaming - Stacked plates
- RM-BNT-3D/5D/8D (Shanks) : Shanks for BAYO T-REAM interchangeable head reamers
- RM-SET-T-B : Single-edged indexable reamers for through holes.
- RM-SHR-H7N-MT : Solid carbide reamers with Morse taper shank, spiral flute DIN 8093. CH - brazed so
- RM-SHR-H7N-CS : Solid carbide reamers with a cylindrical shank, spiral flute - DIN 8093. C - solid
- Milling - Internal thread milling
- MTECI-A60 : 60° partial profile solid carbide thread mills with coolant holes directed to the cutti
- MTECSH-ISO : Small diameter short left-hand (CNC code M04) solid carbide ISO profile threading endm
- MTECS-MJ : Small diameter short solid carbide J-type profile threading endmills with coolant holes
- MTECS-ISO : Small diameter solid carbide ISO profile threading mills. High cutting speeds, short cy
- MTECQ ISO : Solid carbide endmills with internal coolant holes and a reduced diameter neck. Used fo
- MTECQ UN : Solid carbide endmills with internal coolant holes and a reduced diameter neck. Used for
- MTEC-ISO : Solid carbide internal threading endmills used for ISO thread profile.
- MTECB-ISO : Solid carbide internal threading endmill with coolant holes, used for ISO thread profil
- MTECZ-ISO : Solid carbide internal threading endmills with coolant holes located in the flutes.
- MTECB-W : Solid carbide internal or external threading endmills with coolant holes, used for BSP th
- MTECZ-BSF/BSP : Solid carbide threading endmills with coolant holes located in the flutes, used for
- MTECZ-Whitworth : Solid carbide threading endmills with coolant holes located in the flutes, used f
- MTEC-W : Solid carbide threading endmills, used for internal or external BSP thread profile.
- MTECSH-UN : Small diameter short left-hand (CNC code M04) solid carbide UN profile threading endmil
- MTECS-UNJ : Small diameter short solid carbide UNJ-type profile threading endmills with coolant hol
- MTECS-UN : Small diameter solid carbide UN profile threading mills. High cutting speeds, short cycl
- MTEC-UN : Solid carbide threading endmills used for internal UN thread profile.
- MTECZ-UN : Solid carbide threading endmills with coolant holes located in the flutes, used for inte
- MTECB-UN : Solid carbide threading endmills with coolant holes, used for internal UN thread profile
- MTECB-BSPT : Solid carbide external or internal threading endmills with coolant holes, used for BSP
- MTECZ-BSPT : Solid carbide threading endmills with coolant holes located in the flutes, used for in
- MTEC-BSPT : Solid carbide threading endmills, used for external or internal BSPT thread profile.
- MTECZ-NPT : Solid carbide threading endmills with coolant holes located in the flutes, used for int
- MTECB-NPT : Solid carbide threading endmills with coolant holes, used for external or internal NPT
- MTEC-NPT : Solid carbide threading endmills, for external or internal NPT thread profile.
- MTECZ-NPTF : Solid carbide threading endmills with coolant holes located in the flutes, used for in
- MTECB-NPTF : Solid carbide threading endmills with coolant holes, for external or internal NPTF thr
- MTEC-NPTF : Solid carbide threading endmills, for external or internal NPTF thread profile.
- MTSR : Indexable threading endmills with Weldon shank and coolant holes.
- MTSR-C : Indexable threading endmills with long cylindrical carbide shanks and coolant holes.
- MTSR-C-SINGLE : Indexable threading endmills with cylindrical carbide shanks, and coolant holes for
- MTSR-Double Insert : Double insert threading endmills with Weldon shanks.
- MTSRH (endmills) : End mills for with coolant holes for helical threading inserts
- MTSRH (helical shell mill) : Shell mills for with coolant holes for helical threading inserts.
- MTSR-MULTI (shell mill) : Thread milling, multi-insert shell mills
- MM TRD-W : MULTI-MASTER interchangeable solid carbide milling heads, for 55° partial profile thread
- MM TRD-M : MULTI-MASTER interchangeable solid carbide milling heads, for 60° partial profile thread
- MT-ISO-MM : Carbide milling heads with a threaded (MULTI-MASTER) connection for internal ISO metric
- MT-UN-MM : Carbide milling heads with a threaded (MULTI-MASTER) connection, for internal UN thread
- MT-W-MM : Carbide milling heads with a threaded (MULTI-MASTER) connection, for internal and externa
- Milling - Taps for deep blind hole
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP3 (H.S.S.) : HSS R.H. 40° spiral flute, machine taps for ISO metric coarse threads, according to
- TP5 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP6 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP10 (H.S.S.) : HSS right-hand 45° spiral flute, machine taps for ISO metric coarse threads, accord
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Milling - Taps for short blind hole
- TP1 (H.S.S.) : HSS gun point, DIN 371 machine taps for ISO metric coarse threads, according to DIN
- TP3 (H.S.S.) : HSS R.H. 40° spiral flute, machine taps for ISO metric coarse threads, according to
- TP4 (H.S.S.) : HSS R.H. 20° spiral flute, machine taps for ISO metric coarse threads, according to
- TP5 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP6 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP10 (H.S.S.) : HSS right-hand 45° spiral flute, machine taps for ISO metric coarse threads, accord
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- Milling - Deep hole with short thread
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP3 (H.S.S.) : HSS R.H. 40° spiral flute, machine taps for ISO metric coarse threads, according to
- TP4 (H.S.S.) : HSS R.H. 20° spiral flute, machine taps for ISO metric coarse threads, according to
- TP5 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP6 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP10 (H.S.S.) : HSS right-hand 45° spiral flute, machine taps for ISO metric coarse threads, accord
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Milling - Taps for deep through hole
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP2 (H.S.S.) : HSS gun point, DIN 376 machine taps for ISO metric coarse threads, according to DIN
- TP7 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13.
- TP8 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13, for
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Milling - Taps for short through hole
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP2 (H.S.S.) : HSS gun point, DIN 376 machine taps for ISO metric coarse threads, according to DIN
- TP7 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13.
- TP8 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13, for
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Hole Making - Drilling Ext Face Int. Turning
- Hole Making - Drill Face Ext Int Turn Thread
- Hole Making - Taps for deep blind hole
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP5 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP3 (H.S.S.) : HSS R.H. 40° spiral flute, machine taps for ISO metric coarse threads, according to
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP10 (H.S.S.) : HSS right-hand 45° spiral flute, machine taps for ISO metric coarse threads, accord
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- TP6 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- Hole Making - Taps for short blind hole
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP1 (H.S.S.) : HSS gun point, DIN 371 machine taps for ISO metric coarse threads, according to DIN
- TP3 (H.S.S.) : HSS R.H. 40° spiral flute, machine taps for ISO metric coarse threads, according to
- TP4 (H.S.S.) : HSS R.H. 20° spiral flute, machine taps for ISO metric coarse threads, according to
- TP5 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP6 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP10 (H.S.S.) : HSS right-hand 45° spiral flute, machine taps for ISO metric coarse threads, accord
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Hole Making - Deep hole with short thread
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP3 (H.S.S.) : HSS R.H. 40° spiral flute, machine taps for ISO metric coarse threads, according to
- TP4 (H.S.S.) : HSS R.H. 20° spiral flute, machine taps for ISO metric coarse threads, according to
- TP5 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP6 (H.S.S.) : HSS right-hand 40° spiral flute, machine taps for ISO metric coarse threads, accordi
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP10 (H.S.S.) : HSS right-hand 45° spiral flute, machine taps for ISO metric coarse threads, accord
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Hole Making - Taps for deep through hole
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP2 (H.S.S.) : HSS gun point, DIN 376 machine taps for ISO metric coarse threads, according to DIN
- TP7 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13.
- TP8 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13, for
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Hole Making - Taps for short through hole
- TPH (H.S.S.) : HSS hand tap set for ISO metric coarse threads, according to DIN 13.
- TP2 (H.S.S.) : HSS gun point, DIN 376 machine taps for ISO metric coarse threads, according to DIN
- TP7 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13.
- TP8 (H.S.S.) : HSS gun point, machine taps for ISO metric coarse threads, according to DIN 13, for
- TP9 (H.S.S.) : HSS straight flute, machine taps for ISO metric coarse threads, according to DIN 13,
- TP11 (H.S.S.) : HSS cold forming machine taps for ISO metric coarse threads, according to DIN 13.
- Hole Making - Center alignment devices
- ADJ DIN69871-ER : FINEFIT, center alignment DIN 6499 ER collet chucks with DIN 69871 form AD/B tape
- ADJ BT-ER : FINEFIT, DIN 6499 ER collet chucks with center alignment and BT MAS-403 AD tapered shan
- ADJ HSK A-ER : DIN6499 ER collet chucks with center alignment (FINEFIT) and HSK DIN69893/A taper sh
- ADJ C-ER : FINEFIT Center Alignment Shank and Base with a CAMFIX Adaptations. For specially tailore
- ADJ ST-ER : DIN 6499 ER collet chucks with center alignment and cylindrical shanks.
- GYRO DIN69880-ER : GYRO center alignment ER collet chucks with VDI DIN 69880 shanks.
- GYRO ST-ER : GYRO ER collet center alignment device with a cylindrical shank.
- Drilling Eccenter Sleeves : Used for enlarging or reducing DR nominal drilling diameter by shifting
- Reaming - Through & axial groove
- RM-BNT-3D/5D/8D (Shanks) : Shanks for BAYO T-REAM interchangeable head reamers
- RM-SET-T-B : Single-edged indexable reamers for through holes.
- RM-SHR-H7N-MT : Solid carbide reamers with Morse taper shank, spiral flute DIN 8093. CH - brazed so
- RM-SHR-H7N-CS : Solid carbide reamers with a cylindrical shank, spiral flute - DIN 8093. C - solid
- Reaming - Through & radial groove
- RM-BNT-3D/5D/8D (Shanks) : Shanks for BAYO T-REAM interchangeable head reamers
- RM-SET-T-B : Single-edged indexable reamers for through holes.
- RM-SHR-H7N-MT : Solid carbide reamers with Morse taper shank, spiral flute DIN 8093. CH - brazed so
- RM-SHR-H7N-CS : Solid carbide reamers with a cylindrical shank, spiral flute - DIN 8093. C - solid
- Reaming - Blind & perpendicular hole
- RM-BNT-3D/5D/8D (Shanks) : Shanks for BAYO T-REAM interchangeable head reamers
- RM-SET-B-B : Single-edged indexable reamers used for blind holes.
- RM-SHR-H7S-MT : Solid carbide reamers with Morse taper shanks. Straight flute according to DIN 8094
- RM-SHR-H7S-CS : Solid carbide reamers with a cylindrical shank, straight flute-DIN 8093. C - solid
- Reaming - Blind & radial groove
- RM-SHR-H7S-CS : Solid carbide reamers with a cylindrical shank, straight flute-DIN 8093. C - solid
- RM-BNT-3D/5D/8D (Shanks) : Shanks for BAYO T-REAM interchangeable head reamers
- RM-SET-B-B : Single-edged indexable reamers used for blind holes.
- RM-SHR-H7S-MT : Solid carbide reamers with Morse taper shanks. Straight flute according to DIN 8094
- Reaming - Through & perpendicular holes
- RM-BNT-3D/5D/8D (Shanks) : Shanks for BAYO T-REAM interchangeable head reamers
- RM-SET-T-B : Single-edged indexable reamers for through holes.
- RM-SHR-H7N-MT : Solid carbide reamers with Morse taper shank, spiral flute DIN 8093. CH - brazed so
- RM-SHR-H7N-CS : Solid carbide reamers with a cylindrical shank, spiral flute - DIN 8093. C - solid
- Reaming - Reaming
- SCDR-ACK3 (6.8-20 mm 3xD) : Solid carbide drilling reamers, straight flute, drilling depth 3xD. Use
- SCDR-ACK5 (6.8-20 mm 5xD) : Solid carbide drilling reamers, straight flute, drilling depth 5xD. Use
- RM-SRH-Q-MT : Shell reamer shanks with Morse taper, 1:30 conical connection, an extraction nut, dri
- RM SETTING DEVICE : Reamer setting device. Can be used for standard as well special and more compli
- Milling - Milling kits
- KIT FRW : The kit contains 1 MILLSHRED tool and 10 RCMW 1607-T-FW inserts.
- KIT H490 F90AX-17 : The kit contains very thick and strong insert. Can be used for machining steel,
- KIT S845 F45 : The kit contains 45° face mill and 10 inserts. The tool features very rigid clamping
- KIT EFS/EC-CF/ECP : A KIT containing 3 types of solid carbide endmills. FINISHRED, CHATTER FREE and
- KIT ECP-E : The kit contains 4 solid carbide endmills with serrated cutting edges for a combined ro
- KIT EC-CF : The kit contains 4 solid carbide endmills, 4 or 5 flute, 38° helix with variable pitch.
- KIT EFS-B44 : The FINISHRED kit contains 4 solid carbide endmills which can machine a finished surf
- KIT MM S-A : The kit contains straight shanks, for solid carbide heads. Part of the MULTI-MASTER sy
- KIT HM90 E90A : The kit contains 1 HELI2000 endmill and 5 HM90 APKT 1003PDR inserts.
- KIT HM90 E90AD : The kit contains 1 HELI2000 endmill and 5 HM90 ADKT-1505PDR inserts.
- KIT HP E90AN : Extra fine pitch endmills with very tight tool and insert tolerances for high produc
- KIT HOF : The tool uses octagonal inserts with 8 cutting edges of 45°. Round inserts can also be mo
- HSM90 SET APCR : A set containing 5 APCR 1605..RP IC28 inserts and 5 clamping screws. When machinin
- HSM90 SET AXCR : A set containing 5 AXCR 1505..RP IC28 inserts and 5 clamping screws. When machinin
- Shanks
- HSK A-MB : MB modular connection system with DIN 69893 HSK A taper shanks.
- CATM-MB : MB modular boring system connections with CATM FORM AD ANSI B5.5 caterpillar tapered shan
- ST-MB : MB modular connection system with straight cylindrical shanks.
- R8-MB : MB modular connection system with R-8 Bridgeport shanks.
- DIN2079-MB : Connecting plates enable the use of ITSBORE components with "MB" connection
- SKA/SKB
- BT/BTB
- ISOM/ISO
- MTT/MTD
- ISO-Turning
- Ext. Grooving
- DGFHR/L Parting and Grooving Reinforced Blades for DO-GRIP Inserts
- GHDR/L/N 12/14 External Holders for Wide (12-17.4 mm) Grooving Inserts
- TGDR/L External Holders for Turning, Grooving and Profiling
- GHMR/L Toolholders for Shallow Radial and Axial Grooving
- GHMPR/L CUT-GRIP, Perpendicular Toolholders for Shallow Radial and Axial Grooving
- THDR/L/N External Holders for Wide Grooving Inserts
- SXCNN External Toolholders for Wide, Specially Tailored Profile Inserts
- FTHN Square Shank Toolholders for FTB Profile Turning Inserts
- HMSDV SXCN Adapter Holders for Wide Profile Grooving Inserts, for Davenport Machines
- DT-A XNHN/R/L& DT-A FTHN/R/L Semi-Standard Dovetail Type Holders, for Wide Profiling Inserts
- TGPAD Adapters for TGMF / TGMP Groove-Turn Inserts
- GAM External Machining Adapters for Partially Supported CUT-GRIP Inserts
- GADR/L-8 Adapters for up to 25 mm Deep Machining
- TGHN-D Double-Ended Blades for Utility Grooving and Turning Inserts
- CGHR/L-P8DG Double-Ended, Heavy Duty, Self Clamped Grooving and Turning Blades
- CGHN-P8 Blades for Deep Grooving and Turning
- CGHN-8-10D Heavy Duty, Deep Grooving and Turning Blades
- CGHR/L-12-14D Deep Machining Screw Clamped Blades, used for Wide Grooving and Heavy Turning Applic
- TGHN-S Single-Ended Blades for Utility Grooving and Turning Inserts
- DGFHR/L-B-D..(R/L) : Double- and single-ended, parting and grooving reinforced blades for double-en
- DGFHL-26B-TR-D : Double- and single-ended, parting and grooving reinforced blades for double-ended
- DGFH Parting and Grooving Blades with and without Coolant Holes for DO-GRIP Inserts
- DGFS Blades for Multi-Spindle Machines, Replacement for HSS and Brazed Tools
- HGFH Parting and Grooving Blades for 3 mm GRIP Inserts
- KIT DGFH Kit Contains Parting and Grooving Blades with Coolant Holes for DO-GRIP Inserts
- DGAD/HGAD Adapters for Parting and Grooving, for DO-GRIP Double-Ended Inserts
- DGAD-B-D Parting and Grooving Adapters for Double-Ended Inserts, for Davenport HMSDV Machines
- HGPAD Adapters for GRIP and HGPL 3...Y Groove-Turn Inserts
- DGTR/L Integral Shank Parting and Grooving Toolholders
- DGTR/L-B/BC-D Integral Shank, Reinforced, Parting and Grooving Toolholders
- DGTR/L-B-D-SH Parting and Grooving, Short Head Toolholder, for CNC and Swiss Automatics
- DGTR/L-B-D-TR Reinforced Parting and Grooving Toolholders for Double-Ended DO-GRIP Inserts
- DGTR/L-B-T-SH Reinforced Parting and Grooving Toolholders for the DGN Double-Ended Inserts
- DGTR/L-BC-T Parting and Grooving Toolholders with Coolant Holes for JET-CUT Inserts with Coolant H
- TGFH/R/L Blades with Tangentially Oriented Pocket for Parting and Grooving, for TANG-GRIP Single-En
- TGFS Blades for Multi-Spindle Machines - Replacement for HSS and Brazed Tools, Using TANG-GRIP Inse
- TGFH-MB Parting and Grooving Blades for Other Manufacturer's Blocks, Carry TANG-GRIP Single-Ended I
- KIT TGFH Kit Contains Parting and Grooving Blades, for TANG-GRIP Single-Ended Inserts with a Stoppe
- TGSU Flat Top Blades with Tangentially Oriented Pocket for Parting and Grooving, for TANG-GRIP Sing
- TGFH-S Single-Sided Blades for TANG-GRIP Parting and Grooving Inserts
- TGFHR/L Double and Single Ended, Parting and Grooving, Reinforced Blades for TANG-GRIP Tangentially
- TGFHL-TR TANG-GRIP Reinforced Blades for Traub and Index Machines, for TANG-GRIP Tangentially Clamp
- TGTR/L Integral Shank, TANG-GRIP Parting and Grooving Toolholder
- TGBHR/L Integral Shank, Toolholders for Heavy Duty Groove-Turn and Parting Applications
- TGTR/L-2T..SH-L120 Integral Shank, Short-Head, TANG-GRIP Parting and Grooving Toolholder
- TGAD Parting and Grooving Adapters for TANG-GRIP Tangentially Clamped Inserts
- SGB Single-Sided Blades for SELF-GRIP Parting & Grooving Inserts
- SGFH (Four-pockets) Parting and Grooving Four-Pocket Blades
- SGFH/R/L SELF-GRIP Blades with and without Coolant Holes for Parting and Grooving with Single-Ended
- SGFS Replacement SELF-GRIP Blades for HSS and Brazed Parting Tools
- SGIH/R/L Blades for Parting and Grooving with SELF-GRIP Inserts (without a stopper)
- SGFHR/L-26T/32T SELF-GRIP F-Type, Double- and Single-Ended, Reinforced Holder Blades
- SGAFR/L SELF-GRIP Integral Shank Tool for Swiss Automatic Machines
- SGAHR/L SELF-GRIP Integral Shank Tools for Swiss Automatic Lathe Machines
- SGTFR/L SELF-GRIP, Integral Shank Tool for Parting & Grooving
- SGTFR/L-D SELF-GRIP, Reinforced Tool for Parting & Grooving
- SGTHR/L SELF-GRIP, Reinforced Integral Shank Tool for Parting and Grooving
- SGFR/L-B-D-SH Integral Shank, Short Head, Parting and Grooving Toolholder, for CNC and Swiss Automa
- CGHN-D Double-Ended Blades for External Grooving and Turning
- CGHN-S External Machining Single-Ended Blades
- CGHN-DG Double-Ended Blades for External Grooving and Turning Self Clamped Inserts
- GHDR/L (Short pocket) External Holders for Turning, Grooving and Parting
- GHGR/L External Holders for Deep Machining
- GHSR/L External Machining Holders for Swiss Automatic Machines
- HELIR/L External Holder for Turning, Grooving and Parting
- PHGR/L Holders for External Deep Grooving and Turning
- PHSR/L External Machining Holders for Swiss Automatic Machines
- GHDR/L (Long pocket) External Holders for Turning, Grooving and Parting
- SCHR/L-B/F Grooving and Turning Holders, for Swiss-Type Automatics - Back Clamping (Front Clamping
- GEHSR/L Grooving and Turning Holders, for Swiss-Type Automatics
- GHDR/L-8A External Toolholders for Turning, Grooving and Parting, with a Hard Layer Coated Upper Ja
- GAD External Machining Adapters for CUT-GRIP Inserts
- PADR/L Adapters for GDMW/GDMY Groove-Turn Inserts
- GADM Adapters for External CUT-GRIP Grooving and Turning Inserts, Mounted on GHAR/L Holders
- CGPAD Adapters for Groove-Turn Inserts
- PCHBR/L Double-Ended Parting and Grooving Blades for PENTACUT Inserts
- PCHR/L-24 Grooving Parting and Recessing Holders for Inserts with 5 Edges
- PCHPR/L Facing, Grooving, Parting and Recessing Perpendicular Holders for Inserts with 5 Cutting Ed
- PCHR/L-34 Grooving Parting and Recessing Holders for Inserts with 5 Edges
- PCADR/L Adapters for PENTACUT Groove-Turn Inserts
- C#-GHDR/L : External grooving turning and parting toolholders, with CAMFIX (ISO 26623-1 standard)
- C#-HELIR/L External Holders for Turning, Grooving and Parting with CAMFIX (ISO 26623-1 standard) Ex
- UBHCR/L Holders for Grooving Turning and Parting Blades
- Drilling Ext Face Int. Turning
- A-SXFOR-DR Boring and Drilling Bars for XOMT Inserts
- DR-MF-2.25D Multifunction Drilling, Boring, Facing and External Turning Tool
- PICCO-MF Multifunction, Solid Carbide Tools for Drilling, Facing, Int. and Ext. Turning on Swiss an
- PICCO-MFT Solid Carbide Tools for Drilling, Facing, Int. and Ext. Turning and Threading on Swiss an
- HSK
- Extensions and Reducers
- EX-MB : Extensions for the MB modular connection system.
- RE MB-MB : Reducers for the MB modular connection system.
- RE MB-AVI : MB modular system vibration damping reducers.
- CHS MB-R : Coolant supply collar with a stopper for the MB modular boring system.
- CHR MB : Coolant supply collar for the MB modular boring system.
- Threading
- Ext. Grooving & Turning
- CGHN-S Single-ended blades, used for grooving and turning
- FGHR/L : Tools with internal coolant holes, very strong insert grip, used for interrupted cuts and
- GHDR/L/N 12/14 External Holders for Wide (12-17.4 mm) Grooving Inserts
- TGDR/L External Holders for Turning, Grooving and Profiling
- TGPAD Adapters for TGMF / TGMP Groove-Turn Inserts
- GADR/L-8 Adapters for up to 25 mm Deep Machining
- TGHN-D Double-Ended Blades for Utility Grooving and Turning Inserts
- CGHR/L-P8DG Double-Ended, Heavy Duty, Self Clamped Grooving and Turning Blades
- CGHN-P8 Blades for Deep Grooving and Turning
- CGHN-8-10D Heavy Duty, Deep Grooving and Turning Blades
- CGHR/L-12-14D Deep Machining Screw Clamped Blades, used for Wide Grooving and Heavy Turning Applic
- HGFH Parting and Grooving Blades for 3 mm GRIP Inserts
- HGPAD Adapters for GRIP and HGPL 3...Y Groove-Turn Inserts
- TGBHR/L Integral Shank, Toolholders for Heavy Duty Groove-Turn and Parting Applications
- TGHN-S Single-Ended Blades for Utility Grooving and Turning Inserts
- CGHN-D Double-Ended Blades for External Grooving and Turning
- CGHN-DG Double-Ended Blades for External Grooving and Turning Self Clamped Inserts
- GHDR/L (Short pocket) External Holders for Turning, Grooving and Parting
- GHGR/L External Holders for Deep Machining
- GHSR/L External Machining Holders for Swiss Automatic Machines
- HELIR/L External Holder for Turning, Grooving and Parting
- PHGR/L Holders for External Deep Grooving and Turning
- PHSR/L External Machining Holders for Swiss Automatic Machines
- GHDR/L (Long pocket) External Holders for Turning, Grooving and Parting
- SCHR/L-B/F Grooving and Turning Holders, for Swiss-Type Automatics - Back Clamping (Front Clamping
- GEHSR/L Grooving and Turning Holders, for Swiss-Type Automatics
- GHDR/L-8A External Toolholders for Turning, Grooving and Parting, with a Hard Layer Coated Upper Ja
- GAD External Machining Adapters for CUT-GRIP Inserts
- GADM Adapters for External CUT-GRIP Grooving and Turning Inserts, Mounted on GHAR/L Holders
- CGPAD Adapters for Groove-Turn Inserts
- C#-GHDR/L : External grooving turning and parting toolholders, with CAMFIX (ISO 26623-1 standard)
- C#-HELIR/L External Holders for Turning, Grooving and Parting with CAMFIX (ISO 26623-1 standard) Ex
- UBHCR/L Holders for Grooving Turning and Parting Blades
- Drill Face Ext Int Turn Thread
- BT
- Toolholders
- EMH MB : Weldon and Whistle Notch side-lock holders with MB modular boring system connection.
- CC MB-ER : DIN 6499 ER collet chuck with MB modular boring system connection.
- DC MB : DIN 238 DC drill chuck arbor with MB connection modular system.
- TP MB-M : Tapping chucks with MB modular system connections.
- TCC/TCS
- SMH MB : Shell mill holders with MB modular boring system connection.
- AMT MB-MT : MB modular system connection with Morse taper tang DIN 228 A/B.
- BLANK MB : Blanks with MB modular system connection.
- Milling
- Ext. Back turning
- Ext. Turning
- DIN 2080
- Rough Boring Heads
- Hole Making
- Ext. Turning
- Int. Turning
- A-SXFOR-DR Boring and Drilling Bars for XOMT Inserts
- PICCO-MF Multifunction, Solid Carbide Tools for Drilling, Facing, Int. and Ext. Turning on Swiss an
- PICCO-MFT Solid Carbide Tools for Drilling, Facing, Int. and Ext. Turning and Threading on Swiss an
- DR-MF-2.25D Multifunction Drilling, Boring, Facing and External Turning Tool
- Bridgeport R-8
- Fine Boring Heads
- Reaming
- Ext. Profiling
- GADR/L-8 Adapters for up to 25 mm Deep Machining
- TGHN-D Double-Ended Blades for Utility Grooving and Turning Inserts
- TGPAD Adapters for TGMF / TGMP Groove-Turn Inserts
- GHDR/L/N 12/14 External Holders for Wide (12-17.4 mm) Grooving Inserts
- GHVR/L : CUT-GRIP internal and external profiling holders for machining aluminum wheels. An alterna
- TGDR/L External Holders for Turning, Grooving and Profiling
- CGHN-8-10D Heavy Duty, Deep Grooving and Turning Blades
- CGHN-P8 Blades for Deep Grooving and Turning
- FGHR/L : Tools with internal coolant holes, very strong insert grip, used for interrupted cuts and
- CGHN-8-10D Heavy Duty, Deep Grooving and Turning Blades
- 68
- TGHN-S Single-Ended Blades for Utility Grooving and Turning Inserts
- TGBHR/L Integral Shank, Toolholders for Heavy Duty Groove-Turn and Parting Applications
- TGHN-S Single-Ended Blades for Utility Grooving and Turning Inserts
- CGHN-D Double-Ended Blades for External Grooving and Turning
- CGHN-S External Machining Single-Ended Blades
- CGHN-DG Double-Ended Blades for External Grooving and Turning Self Clamped Inserts
- GHDR/L (Short pocket) External Holders for Turning, Grooving and Parting
- GHGR/L External Holders for Deep Machining
- GHSR/L External Machining Holders for Swiss Automatic Machines
- HELIR/L External Holder for Turning, Grooving and Parting
- PHGR/L Holders for External Deep Grooving and Turning
- PHSR/L External Machining Holders for Swiss Automatic Machines
- GHDR/L (Long pocket) External Holders for Turning, Grooving and Parting
- GEHSR/L Grooving and Turning Holders, for Swiss-Type Automatics
- GAD External Machining Adapters for CUT-GRIP Inserts
- GAD External Machining Adapters for CUT-GRIP Inserts
- PADR/L Adapters for GDMW/GDMY Groove-Turn Inserts
- CGPAD Adapters for Groove-Turn Inserts
- C#-GHDR/L : External grooving turning and parting toolholders, with CAMFIX (ISO 26623-1 standard)
- C#-HELIR/L External Holders for Turning, Grooving and Parting with CAMFIX (ISO 26623-1 standard) Ex
- GHDR/L-JHP (Short Pocket) Grooving and Turning CUT-GRIP Toolholders with Channels for High Pressure
- GHDRL-JHP (Long Pocket) Grooving and Turning CUT-GRIP Toolholders with Channels for High Pressure C
- TGHN-D Double-Ended Blades for Utility Grooving and Turning Inserts
- Threading (Ext.)
- ISO
- Boring
- Ext. turning aluminum weels
- FGHR/L : Tools with internal coolant holes, very strong insert grip, used for interrupted cuts and
- GHVR/L : CUT-GRIP internal and external profiling holders for machining aluminum wheels. An alterna
- GHDKR/L : Internal holders for machining aluminum wheels.
- GHDR/L (Long pocket) External Holders for Turning, Grooving and Parting
- GHDR/L-8A External Toolholders for Turning, Grooving and Parting, with a Hard Layer Coated Upper Ja
- Facing
- Straight ST
- Tooling Systems
- Ext. positive trigon 75°approa
- Ext. Undercut
- Threading (Int.
- Int. XOMT 88° approach
- Morse taper
- Multi Function Tools
- Ext. positive trigon 90°approa
- Ext. Threading (Grip)
- GHSR/L External Machining Holders for Swiss Automatic Machines
- GEHSRL External Machining Holders, for Swiss-Type Automatics
- SCHR/L-B/F Grooving and Turning Holders, for Swiss-Type Automatics - Back and Front Clamping
- GHDR/L (Short Pocket) External Holders for Turning, Grooving and Parting
- GHGRL External Holders for Deep Grooving and Parting
- GHMR/L Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
- GHMPR/L Perpendicular Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Pro
- CGPAD Adapters for CUT-GRIP Inserts
- GHDRL-JHP (Short Pocket) Grooving and Turning CUT-GRIP Toolholders with Channels for High Pressure
- CGHN-D Double-Ended Blades for External Grooving and Turning
- CGHN-DG Double-Ended Blades for External Grooving and Turning Self Clamped Inserts
- CGHN-S External Machining Single-Ended Blades
- C#-GHDRL External Grooving, Turning and Parting Toolholders, with CAMFIX (ISO 26623-1 standard) Exc
- VDI-DIN69880
- Cutting Conditions
- Ext. 55° diamond 91° approach
- Int. boring and profiling
- PICCO RL 050 (CBN) CBN Tipped Inserts for Internal Turning Profiling and Chamfering of Hard Steel
- PICCO RL 047 Inserts for Internal Deep Profiling
- PICCO RL 050, 053, 055 Inserts for Internal Turning and Chamfering
- PICCO R 050.20 Inserts for Internal Turning and Chamfering Next to the Bottom of Blind Holes
- PICCO RL 090 Inserts for Internal Turning and Profiling
- PICCO RL 050-C Inserts with Chipformers for Internal Boring and Profiling
- MGUHR Solid Carbide Bars, for Internal Turning and Threading at 4 mm Minimum Bore Diameter
- MGCH Solid Carbide Bars for Internal Grooving, Turning and Threading Dmin 8 mm
- Collet chucks
- Ext. 35° diamond 91° approach
- Int. Profiling
- PICCO RL 004-007 (Radius) Full Radius Inserts, for Internal Profiling
- GEHIMRL Internal Machining Boring Bars with Coolant Holes, for Insert Widths Less than 1.9 mm
- GEHIMRL-SC Internal Machining Solid Carbide Bars with Coolant Holes, for Insert Widths Less than 1.
- GEHIRL Internal Machining Bars with Coolant Holes
- GEHIRL-SC Internal Machining, Solid Carbide Bars with Coolant Holes
- E-GEHIR E-GHIMR Interchangeable Heads for Internal Grooving and Turning
- GHIRL (W=1.9-6.4) Internal Grooving and Turning Bars
- GHIRL (W=7.0-8.3) Internal Grooving and Turning Boring Bars
- GHIRL-C (W=4-6.4) Grooving and Turning Bars with Internal Coolant Holes
- GHIRL-SC (W=2-4.8) Grooving and Turning Solid Carbide Bars with Internal Coolant Holes
- GEAIRL Internal Grooving and Turning Adapters
- GAIRL Internal Grooving and Turning Adapters
- CGIN 26 Internal Grooving and Turning Blades for GHIC...-50 Bars
- CGHN 26-M Internal Grooving and Turning Blades, for GHIC...-70 Bars
- TGHN 26-M Internal Grooving and Turning Blades, for GHIC...-70 Bars
- CGHN 32-M Internal Grooving and Turning Blades, for GHIC...-85 Bars
- CGHN 32-DGM Internal Grooving and Turning Blades, for GHIC...-85 Bars (Self Clamping)
- GEHIURL Undercutting and Turning Boring Bars with Coolant Holes
- GHIURL Undercutting and Turning Boring Bars
- Hydraulic chucks
- Ext. 60° triangle 91° approach
- KM-DTGNR/L : 91° lead angle, R-clamp, toolholders with KM® exchangeable shanks for negative triangu
- KM-PTGNR/L : 91° lead angle, lever lock, toolholders, for negative triangular inserts with ISO KM®
- STGCR/L : 91° lead angle, screw lock toolholders for triangular inserts with 7° clearance angle.
- PTGNR/L-CA : 91° lead angle, lever lock, cartridge tools, for negative triangular inserts.
- C#-DTGNR/L : 91° lead angle, R-clamp, toolholders, for negative triangular inserts with CAMFIX (IS
- C#-PTGNR/L : Lever lock, 91° lead angle toolholders, for negative, triangular inserts with CAMFIX (
- CTGPR/L : Clamp lock toolholders for 11° clearance, triangular inserts.
- DTGNR/L : 91° lead angle, R-clamp, external turning tools, for negative triangular inserts.
- PTGNR/L : 91° lead angle, lever lock, external turning tools, for negative triangular inserts.
- Int. Machining Aluminum Wheels
- GHIUR/L-UC 45° Undercutting Bars for Internal Turning of Aluminum Wheels
- GHIURL-C-A(15° & 27.5°)Bars Internal Grooving and Turning Bars for Machining Aluminum Wheels
- CF5 GHIUR-15A Internal Machining Heads with CLICKFIT Adaptation for Facing and Internal Machining o
- GHIURL-C-22.5A-8V 22.5° Approach Angle Bars, for Facing and Internal Machining
- FGHIUR-C-15A-8 15° Approach Angle Bars, for Interrupted Cuts and Back Turning on Aluminum
- GHIFRL-A 8° 10° Approach Angle Bars, for Facing and Internal Machining
- CF5 A-SVLFCR-16 Boring Head for VCGT 1604 Inserts and a CLICKFIT CF5 Adaptation, for Machining Alum
- CF5 A-SVXCR-22 Boring Heads for VCGT 2205 Inserts and a CLICKFIT CF5 Adaptation, for Machining Alum
- CF5 A-SVXCR-16X2 Double Pocket, Boring Head for VCGT 1604 Inserts and a CLICKFIT CF5 Adaptation, fo
- CF5 GHIFR-8A Internal Machining Heads with CLICKFIT Adaptation for Facing and Internal Machining of
- FGHIFR 8° 10° Approach Angle Bars, for Interrupted Cuts and Back Turning on Aluminum
- CF5 FGHIFR-8A Internal Machining Heads with CLICKFIT Adaptation for Facing and Internal Machining o
- SHORTIN
- Ext. 80° diamond 93° approach
- Int. Grooving
- PICCO RL 002-007 Inserts for Internal Grooving and Turning
- MIFHR Bars for Face and Internal Grooving Undercutting and Threading Inserts
- MGCH Solid Carbide Bars for Internal Grooving, Turning and Threading Dmin 8 mm
- E-GEHIR E-GHIMR Interchangeable Heads for Internal Grooving and Turning
- GEHIRL Internal Machining Bars with Coolant Holes
- GEHIRL-SC Internal Machining, Solid Carbide Bars with Coolant Holes
- GEHIMRL Internal Machining Boring Bars with Coolant Holes, for Insert Widths Less than 1.9 mm
- GEHIMRL-SC Internal Machining Solid Carbide Bars with Coolant Holes, for Insert Widths Less than 1.
- GHIRL (W=1.9-6.4) Internal Grooving and Turning Bar
- GHIRL (W=7.0-8.3) Internal Grooving and Turning Boring Bars
- GHIRL-C (W=4-6.4) Grooving and Turning Bars with Internal Coolant Holes
- GHIRL-SC (W=2-4.8) Grooving and Turning Solid Carbide Bars with Internal Coolant Holes
- HELIIRL Grooving and Turning Bars with Coolant Holes for HELI-GRIP Utility Inserts
- TGIRL-C Grooving and Turning Bars with Coolant Holes for TOP-GRIP Utility Inserts
- SXCIR Internal Toolholders for Specially Tailored Profile Inserts
- GEAIRL Internal Grooving and Turning Adapters
- GAIRL Internal Grooving and Turning Adapters
- CGIN 26 Internal Grooving and Turning Blades for GHIC...-50 Bars
- CGHN 26-M Internal Grooving and Turning Blades, for GHIC...-70 Bars
- CGHN 32-M Internal Grooving and Turning Blades, for GHIC...-85 Bars
- TGHN 26-M Internal Grooving and Turning Blades, for GHIC...-70 Bars
- CGHN 32-DGM Internal Grooving and Turning Blades, for GHIC...-85 Bars (Self Clamping)
- SGFH 26-M Internal Grooving Blades, for GHIC...-70 Bars
- KIT PICCO SET Contains 2 Toolholders and a Set of Solid Carbide Miniature Turning and Grooving Bori
- BALANCIN
- Ext. tangential 93° approach
- KM63 XMZ SLANR/L-TANG : Holders for LNMX-HT - high production cutting, tangentially screw clamped i
- KM63 XMZ SLSNR/L-TANG : Tools for 45° mounting, with KM® XMZ adaptation (for Mazak Integrex machine
- KM-SLANR/L-TANG : Holders with KM® taper shanks for LNMX-HT tangentially, screw clamped inserts. Re
- C#-SLSNR/L-TANG : Tools for 45° mounting, with CAMFIX (ISO 26623-1 standard) taper shanks for LNMX-
- C#-SLANR/L-TANG : Holders with CAMFIX (ISO 26623-1 standard) taper shanks for LNMX-HT tangentially,
- HSK A63WH-SLSNR/L-TANG : Tools for 45° mounting, with HSK taper shanks for LNMX-HT tangentially, sc
- HSK A63WH-SLANR/L-TANG : Holders with HSK taper shanks for LNMX-HT tangentially, screw clamped inse
- PLANR/L-TANG Lever Lock Toolholders for LNMX 1506.. Tangentially Clamped Inserts
- SLANR/L-TANG Toolholders for LNMX Tangentially Clamped Inserts
- Endmill holders
- SHRINKIN
- Shell/face mill adapters
- Drill chuck arbor
- Taper adapters
- FLEXFIT
- Center alignment devices
- CLICKFIT
- CLICKIN
- FITBORE
- Tapping
- GTI DIN69871-ER (Tapping) DIN 6499 ER Tapping Attachments with DIN 69871 Form A Tapered Shanks
- GTI BT-ER (Tapping) DIN 6499 ER Tapping Attachments with BT MAS-403 A Tapered Shanks
- GTI ER-ST (Tapping) DIN 6499 ER Tapping Attachments with Straight Shanks
- GTIN ER-ISO (Tapping) ER Collet Tapping Attachments, Tension and Compression ISO Type for CNC Milli
- GTIN ER-DIN (Tapping) ER Collet Tapping Attachments, Tension and Compression DIN Type for CNC Milli
- GTIN ER-JIS (Tapping) ER Collet Tapping Attachments, Tension and Compression JIS Type for CNC Milli
- Reamer collet chucks
- Collets & accessories
- Tooling kits & sets
- CAMFIX ISO 26623-1
- ISO 26622-1
- Driving ring
- Turn-Groove
- Carbide Endmills
- MX900 ( HSM )
- Ballnose
- Carbide Ballnose Endmills , Reduced Neck / HSM - 2 Flutes / HMRB2 Size: R0.5 ~ R2.0 ( SD4.0 )
- Carbide Ballnose Endmills , Reduced Neck / HSM - 2 Flutes / HERB2 Size: R1.0 ~ R6.0
- Carbide Ballnose Endmills , Medium Shank / HSM - 2 Flutes / MEB2 Size: R2.0 ~ R6.0
- Carbide Ballnose Endmills , Long Shank / HSM - 2 Flutes / MLB2 Size: R3.0 ~ R6.0
- Square
- MX900 Series
- MX900 Series
- Torus
- Carbide Torus Endmills , Long Neck / HSM - 2 Flutes , Short Cut Length / MSR2 Size:D1.0~D12.0
- Carbide Torus Endmills , Semi Long Shank / HSM - 2 Flutes , Short Cut Length / MMR2 Size:D2.0~D12.0
- Carbide Torus Endmills , Reduced Neck / HSM - 4 Flutes , Short Cut Length / MSR4 Size:D3.0~D16.0
- Carbide Torus Endmills , Semi Long Shank / HSM - 4 Flutes , Short Cut Length / MMR4 Size:D6.0~D8.0
- Carbide Torus Endmills For Die & Mould / HSM - 3 Flutes , Short Cut Length / MDR3 Size:D4.0~D12.
- Carbide Torus Endmills / HSM - 6 Flutes , Standard Cut Length / MECR6 Size:D6.0~D12.0
- Miniature
- Ballnose
- Multiple-flute
- Square
- Carbide end mills - 2 flutes , Standard Cut Length / UES2(A) Size:D1.0 ~ D20.0
- Carbide endmills - 3 Flutes , Standard Cut Length / UEH3 ( A ) Size:D1.0~D20.0
- Carbide endmills - 4 Flutes , Standard Cut Length / UES4( A ) Size:D1.0~20.0
- Carbide endmills - 4 Flutes , Standard Cut Length=Outside Diameter x 3 / UEH4 Size:D3.0~D20.0
- Carbide endmills - 2 Flutes , Standard Cut Length / UELS2( A ) Size:D1.0~D16.0
- Carbide endmills - 4 Flutes , Standard Cut Length / UELH4 Size:D1.0~D20.0
- Ballnose
- Carbide Ballnose Endmills - 2 Flutes , Standard Cut Length / UESB2 / UEB2 Size:R0.5~R8.0
- Carbide Ballnose Endmills , Long Shank - 2 Flutes , Standard Cut Length / UELB2( A ) / UXLB2 Size:R1
- Carbide Ballnose Endmills - 4 Flutes , Standard Cut Length / UESB4 / UEB4 Size:R0.5~R6.0
- Carbide Ballnose Mould & Die Endmills / HSM - 2 Flutes / MSBD2 / MBD2 Size:R0.5~R8.0
- Carbide Ballnose Mould & Die Endmills , Long Shank / HSM - 2 Flutes / MLBD2 Size:R3.0~R6.0
- Carbide Ballnose Endmills , Long Taper Neck / HSM - 2 Flutes / MLTB2 Size:R1.0 ~ R2.0
- Torus
- MX 900 Series-Ultra Fine Grain Carbide Torus Endmills Reduced Neck /HSM for Copper & Aluminum /
- MX 900 Series-Ultra Fine Grain Carbide Torus Endmills Long Neck /HSM 2 Flutes ¡B Short Cut Lrngth /
- MX 900 Series-Ultra Fine Grain Carbide Torus Endmills Semi Long Neck /HSM 2 Flutes ¡B Short Cut Lrng
- MX 900 Series-Ultra Fine Grain Carbide Torus Endmills Long Neck /HSM 4 Flutes ¡B Short Cut Lrngth /
- MX 900 Series-Ultra Fine Grain Carbide Torus Endmills ( Semi ) Long Seck / HSM - 2/4 Flutes / MLCR2A
- MX 900 Series-Ultra Fine Grain Carbide Torus Endmills - 2/4 Flutes Short Cut Length / MECR2/MECR4 Si
- Taper
- Application examples
- OTHERS
- Cutting Data
- MX900 ( HSM )
- Cutters
- UNION
- Milling Cutters
- 5 Axis Mould and Die Machining
- ELESA
- BHF 50
